On 18/06/2024 12:53 am, Huang, Haitao wrote:
> From: Kristen Carlson Accardi <kris...@linux.intel.com>
>
> Currently in the EPC page allocation, the kernel simply fails the
> allocation when the current EPC cgroup fails to charge due to its usage
> reaching limit. This is not ideal. When that happens, a better way is
> to reclaim EPC page(s) from the current EPC cgroup (and/or its
> descendants) to reduce its usage so the new allocation can succeed.
>
> Add the basic building blocks to support per-cgroup reclamation.
>
> Currently the kernel only has one place to reclaim EPC pages: the global
> EPC LRU list. To support the "per-cgroup" EPC reclaim, maintain an LRU
> list for each EPC cgroup, and introduce a "cgroup" variant function to
> reclaim EPC pages from a given EPC cgroup and its descendants.
>
> Currently the kernel does the global EPC reclaim in sgx_reclaim_page().
> It always tries to reclaim EPC pages in batch of SGX_NR_TO_SCAN (16)
> pages. Specifically, it always "scans", or "isolates" SGX_NR_TO_SCAN
> pages from the global LRU, and then tries to reclaim these pages at once
> for better performance.
>
> Implement the "cgroup" variant EPC reclaim in a similar way, but keep
> the implementation simple: 1) change sgx_reclaim_pages() to take an LRU
> as input, and return the pages that are "scanned" and attempted for
> reclamation (but not necessarily reclaimed successfully); 2) loop the
> given EPC cgroup and its descendants and do the new sgx_reclaim_pages()
> until SGX_NR_TO_SCAN pages are "scanned".
>
> This implementation, encapsulated in sgx_cgroup_reclaim_pages(), always
> tries to reclaim SGX_NR_TO_SCAN pages from the LRU of the given EPC
> cgroup, and only moves to its descendants when there's no enough
> reclaimable EPC pages to "scan" in its LRU. It should be enough for
> most cases.
[...]
> In other cases, the caller may invoke this function in a
> loop to ensure enough pages reclaimed for its usage. To ensure all
> descendant groups scanned in a round-robin fashion in those cases,
> sgx_cgroup_reclaim_pages() takes in a starting cgroup and returns the
> next cgroup that the caller can pass in as the new starting cgroup for a
> subsequent call.
AFAICT this part is new, and I believe this "round-robin" thing is just
for the "global reclaim"? Or is it also for per-cgroup reclaim where more
than SGX_NR_TO_SCAN pages needs to be reclaimed?
I wish the changelog should just point out what consumers will use this
new sgx_cgroup_reclaim_pages(), like:
The sgx_cgroup_reclaim_pages() will be used in three cases:
1) direct/sync per-cgroup reclaim in try_charge()
2) indirect/async per-cgroup reclaim triggered in try_charge()
3) global reclaim
And then describe how will they use sgx_cgroup_reclaim_pages():
Both 1) and 2) can result in needing to reclaim more than SGX_NR_TO_SCAN
pages, in which case we should <fill in how to reclaim>.
For 3), the new global reclaim should try tot match the existing global
reclaim behaviour, that is to try to treat all EPC pages equally.
<continue to explain how can sgx_cgroup_reclaim_pages() achieve this.>
With above context, we can justify why to make sgx_cgroup_reclaim_pages()
in this form.
>
> Note, this simple implementation doesn't _exactly_ mimic the current
> global EPC reclaim (which always tries to do the actual reclaim in batch
> of SGX_NR_TO_SCAN pages): when LRUs have less than SGX_NR_TO_SCAN
> reclaimable pages, the actual reclaim of EPC pages will be split into
> smaller batches _across_ multiple LRUs with each being smaller than
> SGX_NR_TO_SCAN pages.
>
> A more precise way to mimic the current global EPC reclaim would be to
> have a new function to only "scan" (or "isolate") SGX_NR_TO_SCAN pages
> _across_ the given EPC cgroup _AND_ its descendants, and then do the
> actual reclaim in one batch. But this is unnecessarily complicated at
> this stage.
>
> Alternatively, the current sgx_reclaim_pages() could be changed to
> return the actual "reclaimed" pages, but not "scanned" pages. However,
> the reclamation is a lengthy process, forcing a successful reclamation
> of predetermined number of pages may block the caller for too long. And
> that may not be acceptable in some synchronous contexts, e.g., in
> serving an ioctl().
>
> With this building block in place, add synchronous reclamation support
> in sgx_cgroup_try_charge(): trigger a call to
> sgx_cgroup_reclaim_pages() if the cgroup reaches its limit and the
> caller allows synchronous reclaim as indicated by s newly added
> parameter.
>
> A later patch will add support for asynchronous reclamation reusing
> sgx_cgroup_reclaim_pages().
It seems you also should mention the new global reclaim will also use
this sgx_cgroup_reclaim_pages()?
[...]
> +/**
> + * sgx_cgroup_reclaim_pages() - reclaim EPC from a cgroup tree
> + * @root: The root of cgroup tree to reclaim from.
> + * @start: The descendant cgroup from which to start the tree walking.
> + *
> + * This function performs a pre-order walk in the cgroup tree under the given
> + * root, starting from the node %start, or from the root if %start is NULL.
> The
> + * function will attempt to reclaim pages at each node until a fixed number
> of
> + * pages (%SGX_NR_TO_SCAN) are attempted for reclamation. No guarantee of
> + * success on the actual reclamation process. In extreme cases, if all pages
> in
> + * front of the LRUs are recently accessed, i.e., considered "too young" to
> + * reclaim, no page will actually be reclaimed after walking the whole tree.
> + *
> + * In some cases, a caller may want to ensure enough reclamation until its
> + * specific need is met. In those cases, the caller should invoke this
> function
> + * in a loop, and at each iteration passes in the same root and the next node
> + * returned from the previous call as the new %start.
> + *
> + * Return: The next misc cgroup in the subtree to continue the scanning and
> + * attempt for more reclamation from this subtree if needed.
>
[...]
> Caller must
> + * release the reference if the returned is not used as %start for a
> subsequent
> + * call.
>
This sentence isn't clear to me.
First of all, release the reference "of what"? The %start, or the one
returned by this function?
And is it because of ...
> + */
> +static struct misc_cg *sgx_cgroup_reclaim_pages(struct misc_cg *root, struct
> misc_cg *start)
> +{
> + struct cgroup_subsys_state *css_root, *pos;
> + struct cgroup_subsys_state *next = NULL;
> + struct sgx_cgroup *sgx_cg;
> + unsigned int cnt = 0;
> +
> + /* Caller must ensure css_root and start ref's acquired */
... the caller must acquire the ref of both @css_root and @css_start, and
...
> + css_root = &root->css;
> + if (start)
> + pos = &start->css;
> + else
> + pos = css_root;
> +
> + while (cnt < SGX_NR_TO_SCAN) {
> + sgx_cg = sgx_cgroup_from_misc_cg(css_misc(pos));
> + cnt += sgx_reclaim_pages(&sgx_cg->lru);
> +
> + rcu_read_lock();
> +
> + next = css_next_descendant_pre(pos, css_root);
> +
> + if (pos != css_root)
> + css_put(pos);
... the ref is decreased internally?
> +
> + if (!next || !css_tryget(next)) {
> + /* We are done if next is NULL or not safe to continue
> + * the walk if next is dead. Return NULL and the caller
> + * determines whether to restart from root.
> + */
Incorrect comment style.
> + rcu_read_unlock();
> + return NULL;
> + }
> +
> + rcu_read_unlock();
> + pos = next;
There's no ref grab here, wouldn't the above ...
if (pos != css_root)
css_put(pos);
... decrease the ref w/o having it been increased?
> + }
> +
> + return css_misc(next);
Here AFAICT the ref isn't increased, but ...
[...]
> +/**
> + * sgx_cgroup_try_charge() - try to charge cgroup for a single EPC page
> * @sgx_cg: The EPC cgroup to be charged for the page.
> + * @reclaim: Whether or not synchronous EPC reclaim is allowed.
> * Return:
> * * %0 - If successfully charged.
> * * -errno - for failures.
> */
> -int sgx_cgroup_try_charge(struct sgx_cgroup *sgx_cg)
> +int sgx_cgroup_try_charge(struct sgx_cgroup *sgx_cg, enum sgx_reclaim
> reclaim)
> {
> - return misc_cg_try_charge(MISC_CG_RES_SGX_EPC, sgx_cg->cg, PAGE_SIZE);
> + int ret;
> + struct misc_cg *cg_next = NULL;
> +
> + for (;;) {
> + ret = __sgx_cgroup_try_charge(sgx_cg);
> +
> + if (ret != -EBUSY)
> + goto out;
> +
> + if (reclaim == SGX_NO_RECLAIM) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + cg_next = sgx_cgroup_reclaim_pages(sgx_cg->cg, cg_next);
> + cond_resched();
> + }
> +
> +out:
> + if (cg_next != sgx_cg->cg)
> + put_misc_cg(cg_next);
... if I am reading correctly, here you does the put anyway.
> + return ret;
> }
>
And when there are more than SGX_NR_TO_SCAN pages that need to reclaim,
the above ...
for (;;) {
cg_next = sgx_cgroup_reclaim_pages(sgx_cg->cg, cg_next);
}
... actually tries to reclaim those pages from @sgx_cg _AND_ it's
descendants, and tries to do it _EQUALLY_.
Is this desired, or should we always try to reclaim from the @sgx_cg
first, but only moves to the desendants when the @sgx_cg shouldn't be
reclaimed anymore?
Anyway, it's different from the previous behaviour.
[...]
> -static bool sgx_should_reclaim(unsigned long watermark)
> +static bool sgx_should_reclaim_global(unsigned long watermark)
> {
> return atomic_long_read(&sgx_nr_free_pages) < watermark &&
> !list_empty(&sgx_global_lru.reclaimable);
> }
>
> +static void sgx_reclaim_pages_global(void)
> +{
> + sgx_reclaim_pages(&sgx_global_lru);
> +}
> +
> /*
> * sgx_reclaim_direct() should be called (without enclave's mutex held)
> * in locations where SGX memory resources might be low and might be
> @@ -394,8 +405,8 @@ static bool sgx_should_reclaim(unsigned long watermark)
> */
> void sgx_reclaim_direct(void)
> {
> - if (sgx_should_reclaim(SGX_NR_LOW_PAGES))
> - sgx_reclaim_pages();
> + if (sgx_should_reclaim_global(SGX_NR_LOW_PAGES))
> + sgx_reclaim_pages_global();
> }
>
I wish the rename was mentioned in the changelog too.
