[PATCH 1/2] arm64: dts: qcom: msm8916-longcheer-l8910: Enable RGB LED

[André Apitzsch]

l8910 uses KTD2026 LED driver. Add it to the device tree.

Tested-by: Stephan Gerhold <step...@gerhold.net>
Signed-off-by: André Apitzsch <g...@apitzsch.eu>
---
 .../boot/dts/qcom/msm8916-longcheer-l8910.dts      | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts 
b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 41cadb906b98..68258cf4205f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
        model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -74,6 +75,46 @@ usb_id: usb-id {
        };
 };
 
+&blsp_i2c2 {
+       status = "okay";
+
+       led-controller@30 {
+               compatible = "kinetic,ktd2026";
+               reg = <0x30>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin-supply = <&pm8916_l17>;
+               vio-supply = <&pm8916_l6>;
+
+               pinctrl-0 = <&status_led_default>;
+               pinctrl-names = "default";
+
+               multi-led {
+                       color = <LED_COLOR_ID_RGB>;
+                       function = LED_FUNCTION_STATUS;
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led@0 {
+                               reg = <0>;
+                               color = <LED_COLOR_ID_RED>;
+                       };
+
+                       led@1 {
+                               reg = <1>;
+                               color = <LED_COLOR_ID_GREEN>;
+                       };
+
+                       led@2 {
+                               reg = <2>;
+                               color = <LED_COLOR_ID_BLUE>;
+                       };
+               };
+       };
+};
+
 &blsp_i2c3 {
        status = "okay";
 
@@ -107,6 +148,16 @@ &blsp_uart2 {
        status = "okay";
 };
 
+&pm8916_gpios {
+       status_led_default: status-led-default-state {
+               pins = "gpio3";
+               function = PMIC_GPIO_FUNC_NORMAL;
+               power-source = <PM8916_GPIO_VPH>;
+               bias-disable;
+               output-high;
+       };
+};
+
 &pm8916_resin {
        status = "okay";
        linux,code = <KEY_VOLUMEDOWN>;

-- 
2.42.0