Am Montag, dem 29.03.2021 um 16:03 +0800 schrieb Richard Zhu: > Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. > In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data > sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design, > the VREG_BYPASS bits of GPR registers should be cleared from default > value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be > turned on. > > Signed-off-by: Richard Zhu <hongxing....@nxp.com>
Reviewed-by: Lucas Stach <l.st...@pengutronix.de> > --- > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index de4b2baf91e8..d8971ab99274 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -38,6 +38,9 @@ Optional properties: > The regulator will be enabled when initializing the PCIe host and > disabled either as part of the init process or when shutting down the > host. > +- vph-supply: Should specify the regulator in charge of VPH one of the three > + PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v > voltage > + supplies. > > > > > Additional required properties for imx6sx-pcie: > - clock names: Must include the following additional entries:
