Add support for TI TPS53676 controller to the tps53679 pmbus driver
The driver uses the USER_DATA_03 register to figure out how many phases are
enabled and to which channel they are assigned, and sets the number of pages
and phases accordingly.
Signed-off-by: Erik Rosen <erik.ro...@metormote.com>
---
Documentation/hwmon/tps53679.rst | 13 +++++++--
drivers/hwmon/pmbus/Kconfig | 4 +--
drivers/hwmon/pmbus/tps53679.c | 49 +++++++++++++++++++++++++++++++-
3 files changed, 61 insertions(+), 5 deletions(-)
diff --git a/Documentation/hwmon/tps53679.rst b/Documentation/hwmon/tps53679.rst
index c7c589e49789..3b9561648c24 100644
--- a/Documentation/hwmon/tps53679.rst
+++ b/Documentation/hwmon/tps53679.rst
@@ -19,6 +19,14 @@ Supported chips:
Datasheet: https://www.ti.com/lit/gpn/TPS53667
+ * Texas Instruments TPS53676
+
+ Prefix: 'tps53676'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/TPS53676
+
* Texas Instruments TPS53679
Prefix: 'tps53679'
@@ -136,7 +144,7 @@ power1_input Measured input power.
power[N]_label "pout[1-2]".
- TPS53647, TPS53667: N=2
- - TPS53679, TPS53681, TPS53588: N=2,3
+ - TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
power[N]_input Measured output power.
@@ -156,10 +164,11 @@ curr[N]_label "iout[1-2]" or "iout1.[0-5]".
The first digit is the output channel, the second
digit is the phase within the channel. Per-phase
- telemetry supported on TPS53681 only.
+ telemetry supported on TPS53676 and TPS53681 only.
- TPS53647, TPS53667: N=2
- TPS53679, TPS53588: N=2,3
+ - TPS53676: N=2-8
- TPS53681: N=2-9
curr[N]_input Measured output current.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 32d2fc850621..35956a9227d8 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -257,10 +257,10 @@ config SENSORS_TPS40422
be called tps40422.
config SENSORS_TPS53679
- tristate "TI TPS53647, TPS53667, TPS53679, TPS53681, TPS53688"
+ tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
help
If you say yes here you get hardware monitoring support for TI
- TPS53647, TPS53667, TPS53679, TPS53681, and TPS53688.
+ TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
This driver can also be built as a module. If so, the module will
be called tps53679.
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
index ba838fa311c3..d8e5f71ff162 100644
--- a/drivers/hwmon/pmbus/tps53679.c
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -16,11 +16,14 @@
#include "pmbus.h"
enum chips {
- tps53647, tps53667, tps53679, tps53681, tps53688
+ tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
};
#define TPS53647_PAGE_NUM 1
+#define TPS53676_USER_DATA_03 0xb3
+#define TPS53676_MAX_PHASES 7
+
#define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
#define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
#define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC
*/
@@ -143,6 +146,43 @@ static int tps53681_identify(struct i2c_client *client,
TPS53681_DEVICE_ID);
}
+static int tps53676_identify(struct i2c_client *client,
+ struct pmbus_driver_info *info)
+{
+ u8 buf[I2C_SMBUS_BLOCK_MAX];
+ int phases_a = 0, phases_b = 0;
+ int i, ret;
+
+ ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+ if (ret < 0)
+ return ret;
+ if (strncmp("TI\x53\x67\x60", buf, 5)) {
+ dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
+ return -ENODEV;
+ }
+
+ ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
+ if (ret < 0)
+ return ret;
+ for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
+ if (buf[i + 1] & 0x80) {
+ if (buf[i] & 0x08)
+ phases_b++;
+ else
+ phases_a++;
+ }
+ }
+
+ info->format[PSC_VOLTAGE_OUT] = linear;
+ info->pages = 1;
+ info->phases[0] = phases_a;
+ if (phases_b > 0) {
+ info->pages = 2;
+ info->phases[1] = phases_b;
+ }
+ return 0;
+}
+
static int tps53681_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
@@ -183,6 +223,7 @@ static struct pmbus_driver_info tps53679_info = {
.pfunc[3] = PMBUS_HAVE_IOUT,
.pfunc[4] = PMBUS_HAVE_IOUT,
.pfunc[5] = PMBUS_HAVE_IOUT,
+ .pfunc[6] = PMBUS_HAVE_IOUT,
};
static int tps53679_probe(struct i2c_client *client)
@@ -206,6 +247,9 @@ static int tps53679_probe(struct i2c_client *client)
info->pages = TPS53647_PAGE_NUM;
info->identify = tps53679_identify;
break;
+ case tps53676:
+ info->identify = tps53676_identify;
+ break;
case tps53679:
case tps53688:
info->pages = TPS53679_PAGE_NUM;
@@ -227,9 +271,11 @@ static int tps53679_probe(struct i2c_client *client)
static const struct i2c_device_id tps53679_id[] = {
{"tps53647", tps53647},
{"tps53667", tps53667},
+ {"tps53676", tps53676},
{"tps53679", tps53679},
{"tps53681", tps53681},
{"tps53688", tps53688},
+ {"bmr474", tps53676},
{}
};
@@ -238,6 +284,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
static const struct of_device_id __maybe_unused tps53679_of_match[] = {
{.compatible = "ti,tps53647", .data = (void *)tps53647},
{.compatible = "ti,tps53667", .data = (void *)tps53667},
+ {.compatible = "ti,tps53676", .data = (void *)tps53676},
{.compatible = "ti,tps53679", .data = (void *)tps53679},
{.compatible = "ti,tps53681", .data = (void *)tps53681},
{.compatible = "ti,tps53688", .data = (void *)tps53688},
--
2.20.1
