Hi Jacopo, Thank you for the patch.
On Mon, Mar 15, 2021 at 02:14:56PM +0100, Jacopo Mondi wrote: > Enable the noise immunity threshold at the end of the rdacm20 > initialization routine. > > The rdacm20 camera module has been so far tested with a startup > delay that allowed the embedded MCU to program the serializer. If > the initialization routine is run before the MCU programs the > serializer and the image sensor and their addresses gets changed > by the rdacm20 driver it is required to manually enable the noise > immunity threshold to make the communication on the control channel > more reliable. I'm still worried by the race with the MCU. Any update on dumping the MCU configuration to check what it initializes ? > Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org> > --- > drivers/media/i2c/rdacm20.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c > index 90eb73f0e6e9..f7fd5ae955d0 100644 > --- a/drivers/media/i2c/rdacm20.c > +++ b/drivers/media/i2c/rdacm20.c > @@ -541,7 +541,13 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > > dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n"); > > - return 0; > + /* > + * Set reverse channel high threshold to increase noise immunity. > + * > + * This should be compensated by increasing the reverse channel > + * amplitude on the remote deserializer side. > + */ > + return max9271_set_high_threshold(&dev->serializer, true); > } > > static int rdacm20_probe(struct i2c_client *client) -- Regards, Laurent Pinchart
