On Sat, 13 Mar 2021 12:34:10 +0100,
Vitaly Rodionov wrote:
> @@ -1357,6 +1362,22 @@ static const struct hda_verb
> cs8409_cs42l42_init_verbs[] = {
> { 0x47, AC_VERB_SET_PROC_COEF, 0x0080 }, /* I2C mode */
> { 0x47, AC_VERB_SET_COEF_INDEX, 0x005b }, /* Set I2C bus speed */
> { 0x47, AC_VERB_SET_PROC_COEF, 0x0200 }, /* 100kHz I2C_STO = 2 */
> + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0xF0 }, /* Widget node
> ASP-1-TX */
> + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x20 },
> + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x21 },
> + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x04 },
> + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0x50 }, /* Widget node
> ASP-1-RX0 */
> + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x20 },
> + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0xa1 },
> + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x04 },
> + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0xF0 }, /* Widget node
> ASP-2-TX */
> + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x00 },
> + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x10 },
> + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x90 },
> + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0x90 }, /* Widget node
> DMIC-1 */
> + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x00 },
> + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0xA0 },
> + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x90 },
Those widgets are all pin widgets, right? If so, setting via the
pincfg table would be more suitable, as it's cached and exposed via
sysfs for debugging.
thanks,
Takashi
