This one sent by mistake, please ignore it.
There is another v3 4/5 that has a correct name.
Sorry for the mess.

Kosta

> -----Original Message-----
> From: kos...@marvell.com <kos...@marvell.com>
> Sent: Sunday, March 7, 2021 18:34
> To: linux-arm-ker...@lists.infradead.org; devicet...@vger.kernel.org; linux-
> ker...@vger.kernel.org
> Cc: lkund...@v3.sk; li...@armlinux.org.uk;
> sebastian.hesselba...@gmail.com; gregory.clem...@bootlin.com;
> and...@lunn.ch; robh...@kernel.org; vk...@kernel.org; kis...@ti.com;
> miquel.ray...@bootlin.com; m...@semihalf.com; j...@semihalf.com; Nadav
> Haklai <nad...@marvell.com>; Stefan Chulski <stef...@marvell.com>; Ben
> Peled <bpe...@marvell.com>; Kostya Porotchkin <kos...@marvell.com>
> Subject: [PATCH v3 4/5] arch/arm64: dts: add support for Marvell CP110 UTMI
> driver
> 
> From: Konstantin Porotchkin <kos...@marvell.com>
> 
> Add support for Marvell CP110 UTMI PHY  in a common DTSI
> 
> Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 64179a372ecf..49f9d2cd8619 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -285,6 +285,25 @@
>                       };
>               };
> 
> +             CP11X_LABEL(utmi): utmi@580000 {
> +                     compatible = "marvell,cp110-utmi-phy";
> +                     reg = <0x580000 0x2000>;
> +                     marvell,system-controller =
> <&CP11X_LABEL(syscon0)>;
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +                     status = "disabled";
> +
> +                     CP11X_LABEL(utmi0): usb-phy@0 {
> +                             reg = <0>;
> +                             #phy-cells = <0>;
> +                     };
> +
> +                     CP11X_LABEL(utmi1): usb-phy@1 {
> +                             reg = <1>;
> +                             #phy-cells = <0>;
> +                     };
> +             };
> +
>               CP11X_LABEL(usb3_0): usb@500000 {
>                       compatible = "marvell,armada-8k-xhci",
>                       "generic-xhci";
> --
> 2.17.1

Reply via email to