Hi Konrad, On 06/03/2021 10:49 am, Konrad Dybcio wrote: > > On 05.03.2021 22:35, Caleb Connolly wrote: >> Add a minimal devicetree capable of booting on the Pixel 2 XL MSM8998 >> device. >> >> It's currently possible to boot the device into postmarketOS with USB >> networking, however the display panel depends on Display Stream >> Compression which is not yet supported in the kernel. >> >> The bootloader also requires that the dtbo partition contains a device >> tree overlay with a particular id which has to be overlayed onto the >> existing dtb. It's possible to use a specially crafted dtbo partition to >> workaround this, more information is available here: >> >> https://gitlab.com/calebccff/dtbo-google-wahoo-mainline >> >> Signed-off-by: Caleb Connolly <ca...@connolly.tech> >> --- >> It's possible to get wifi working by running Bjorns diag-router in the >> background, without this the wifi firmware crashes every 10 seconds or >> so. This is the same issue encountered on the OnePlus 5. >> >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> .../boot/dts/qcom/msm8998-google-taimen.dts | 14 + >> .../boot/dts/qcom/msm8998-google-wahoo.dtsi | 391 ++++++++++++++++++ >> 3 files changed, 406 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts >> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile >> b/arch/arm64/boot/dts/qcom/Makefile >> index 5113fac80b7a..d942d3ec3928 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += >> msm8994-msft-lumia-cityman.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += msm8998-google-taimen.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb >> diff --git a/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts >> b/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts >> new file mode 100644 >> index 000000000000..ffaaafe14037 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/msm8998-google-taimen.dts >> @@ -0,0 +1,14 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (c) 2020, Caleb Connolly <ca...@connolly.tech> >> + */ >> + >> +/dts-v1/; >> + >> +#include "msm8998-google-wahoo.dtsi" >> + >> +/ { >> + model = "Google Pixel 2 XL"; >> + compatible = "google,taimen", "google,wahoo", "qcom,msm8998", >> "qcom,msm8998-mtp"; > Drop the mtp compatible. Also, afaict wahoo is a shared platform name for > P2/2XL, so perhaps using the same naming scheme we used for Xperias/Lumias > (soc-vendor-platform-board) would clear up some confusion. In this case, I'm > not sure about the wahoo compatible, but I reckon it's fine for it to stay so > that it's easier to introduce potential quirks that concern both devices. > Yeah, I think it's useful to have a shared compatible for similar devices. >> + qcom,msm-id = <0x124 0x20001>; > Move it to the common dtsi, unless the other Pixel ships with a different SoC > revision. > > >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi >> b/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi >> new file mode 100644 >> index 000000000000..0c221ead2df7 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/msm8998-google-wahoo.dtsi >> @@ -0,0 +1,391 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Copyright (c) 2020 Caleb Connolly <ca...@connolly.tech> */ >> + >> +#include "msm8998.dtsi" >> +#include "pm8998.dtsi" >> +#include "pmi8998.dtsi" >> +#include "pm8005.dtsi" >> + >> +/delete-node/ &mpss_mem; >> +/delete-node/ &venus_mem; >> +/delete-node/ &mba_mem; >> +/delete-node/ &slpi_mem; >> + >> +/ { >> + aliases { >> + }; >> + >> + chosen { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + /* Add "earlycon" intended to be used in combination with UART >> serial console */ >> + bootargs = "clk_ignore_unused earlycon >> console=ttyGS0,115200";// loglevel=10 drm.debug=15 debug"; > clk_ignore_unused is a BIG hack! Ah, I haven't touched this device in a while, seems like we don't need this anymore on 5.11 > > You should trace which clocks are important for it to stay alive and fix it > on the driver side. > > What breaks if it's not there? Does it still happen with Angelo's clk patches > that got in for the 5.12 > > window? > > Aside from that, //loglevel... should also go. > > >> + >> + vph_pwr: vph-pwr-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vph_pwr"; >> + regulator-always-on; >> + regulator-boot-on; >> + }; >> +}; > Don't you need to specify voltage here? This is based on the MTP board, which does not specify a voltage. Do you know what the correct voltage is here? I can find references to 3300000-3500000 uv but I don't know if that's correct. It seems to be derived directly from the battery / power voltage, so this seems about right. > >> + >> +&blsp1_uart3 { >> + status = "disabled"; >> + >> + bluetooth { >> + compatible = "qcom,wcn3990-bt"; >> + >> + vddio-supply = <&vreg_s4a_1p8>; >> + vddxo-supply = <&vreg_l7a_1p8>; >> + vddrf-supply = <&vreg_l17a_1p3>; >> + vddch0-supply = <&vreg_l25a_3p3>; >> + max-speed = <3200000>; >> + }; >> +}; > Either enable the UART or rid the bluetooth for now. > > >> + >> +&pm8005_lsid1 { >> + pm8005-regulators { >> + compatible = "qcom,pm8005-regulators"; >> + >> + vdd_s1-supply = <&vph_pwr>; >> + >> + pm8005_s1: s1 { /* VDD_GFX supply */ > regulator-name = "vdd_gfx"; > > >> + >> +&spmi_bus { >> + pmic@0 { >> + compatible = "qcom,pm8994", "qcom,spmi-pmic"; >> + reg = <0x0 SPMI_USID>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + pon@800 { >> + compatible = "qcom,pm8916-pon"; >> + >> + reg = <0x800>; >> + mode-bootloader = <0x2>; >> + mode-recovery = <0x1>; >> + >> + pwrkey { >> + compatible = "qcom,pm8941-pwrkey"; >> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; >> + debounce = <15625>; >> + bias-pull-up; >> + linux,code = <KEY_POWER>; >> + }; >> + }; >> + }; >> +}; > That's a lot of indentation, it would be better to add a label: somewhere > instead.. Moreover, the exact same pwrkey node is already present in > pm8998.dtsi, so you should just drop this.
Dropped. Thanks for the review. Regards, Caleb > > Konrad >
