On 2/14/21 6:44 PM, Jagan Teki wrote:
SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
controller IC's from Texas Instruments.
SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge
[...]
+description: |
+ SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge controller
+ IC's from Texas Instruments.
+
+ SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
+ SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
+ SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge
[...]
+properties:
+ compatible:
+ enum:
+ - ti,sn65dsi83
+ - ti,sn65dsi84
DSI85 seems missing ?
+ reg:
+ const: 0x2c
I have the DSI83 device at 0x2d, so this cannot be const 0x2c ?
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for bridge enable pin (active high).
The bridge can work without this GPIO, so its optional.
[...]
Also, Doug reported that vcc and vcore regulators should likely be
listed, see feedback on:
[PATCH 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 bindings
