From: Hans de Goede <[email protected]> [ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has a jack-detect switch which reads 1/high when a jack is inserted, rather then using the standard active-low setup which most jack-detect switches use. All other settings are using the defaults. Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV flags for this. Signed-off-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]> --- sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 688b5e0a49e3..bf8b87d45cb0 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { BYT_RT5651_SSP0_AIF1 | BYT_RT5651_MONO_SPEAKER), }, + { + /* Jumper EZpad 7 */ + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Jumper"), + DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"), + /* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ + DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), + }, + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN2_MAP | + BYT_RT5651_JD_NOT_INV), + }, { /* KIANO SlimNote 14.2 */ .callback = byt_rt5651_quirk_cb, -- 2.30.1
