[PATCH 08/11] arm64: dts: qcom: pm8994: Add RESIN node

[Konrad Dybcio]

Add a RESIN node to support RESIN-connected buttons on some
devices.

Signed-off-by: Konrad Dybcio <konrad.dyb...@somainline.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 19 +++++--------------
 arch/arm64/boot/dts/qcom/pm8994.dtsi         |  8 +++++++-
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi 
b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index e6ef76971c31..d2a5fb0c8df1 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -249,6 +249,11 @@ &mmcc {
        vdd-gfx-supply = <&vdd_gfx>;
 };
 
+&pm8994_resin {
+       status = "okay";
+       linux,code = <KEY_VOLUMEDOWN>;
+};
+
 &tlmm {
        gpio-line-names =
                "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
@@ -1030,20 +1035,6 @@ codec {
        };
 };
 
-&spmi_bus {
-       pmic@0 {
-               pon@800 {
-                       resin {
-                               compatible = "qcom,pm8941-resin";
-                               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-                               debounce = <15625>;
-                               bias-pull-up;
-                               linux,code = <KEY_VOLUMEDOWN>;
-                       };
-               };
-       };
-};
-
 &ufsphy {
        status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi 
b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index c3876c82c874..ad19016df047 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -45,7 +45,6 @@ rtc@6000 {
 
                pm8994_pon: pon@800 {
                        compatible = "qcom,pm8916-pon";
-
                        reg = <0x800>;
                        mode-bootloader = <0x2>;
                        mode-recovery = <0x1>;
@@ -58,6 +57,13 @@ pwrkey {
                                linux,code = <KEY_POWER>;
                        };
 
+                       pm8994_resin: resin {
+                               compatible = "qcom,pm8941-resin";
+                               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               status = "disabled";
+                       };
                };
 
                pm8994_temp: temp-alarm@2400 {
-- 
2.30.1