Hi Hans, > > - adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]); > > + err = adv7511_edid_rd(sd, 256, &state->edid.data[segment * > > 256]); > > adv7511_dbg_dump_edid(2, debug, sd, segment, > > &state->edid.data[segment * 256]); > > Only call adv7511_dbg_dump_edid if err >= 0.
Yes.
>
> > if (segment == 0) {
>
> Change condition to: err >= 0 && segment == 0
Yes.
>
> > state->edid.blocks = state->edid.data[0x7e] + 1;
> > v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n",
> > __func__, state->edid.blocks);
> > }
So I guarded the above block with an 'if (!err)' clause.
adv7511_edid_rd() returns either 0 or errno, so we can take the above
simpler condition.
> > - if (!edid_verify_crc(sd, segment) ||
> > - !edid_verify_header(sd, segment)) {
> > + if (err < 0 || !edid_verify_crc(sd, segment) ||
> > !edid_verify_header(sd, segment)) {
> > /* edid crc error, force reread of edid segment */
>
> Hmm, this comment is a bit out of date. Change to:
>
> /*
> * Couldn't read EDID or EDID has invalid content.
> * Force reread of EDID segment.
> */
I updated the comment but kept it a oneliner.
>
> > v4l2_err(sd, "%s: edid crc or header error\n",
> > __func__);
>
> Only show this message if err >= 0. For err < 0 the adv7511_edid_rd() already
> logs an error.
Yes. I used 'if (!err)' again here.
Will resend in a minute, thanks for the review!
All the best,
Wolfram
signature.asc
Description: PGP signature
