From: Jay Cliburn <[EMAIL PROTECTED]>
When we initially set max rx frame size, we don't explicitly allow room for
the VLAN header; it's done later in a somewhat obscure fashion. Let's make
it clear from the top that we've allowed enough room for the VLAN header.
Signed-off-by: Jay Cliburn <[EMAIL PROTECTED]>
---
drivers/net/atlx/atl1.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 695dcbc..c93cf19 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -113,7 +113,7 @@ static int __devinit atl1_sw_init(struct atl1_adapter
*adapter)
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->wol = 0;
@@ -744,8 +744,8 @@ static u32 atl1_configure(struct atl1_adapter *adapter)
/* set Interrupt Clear Timer */
iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
- /* set MTU, 4 : VLAN */
- iowrite32(hw->max_frame_size + 4, hw->hw_addr + REG_MTU);
+ /* set MTU size */
+ iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
/* jumbo size & rrd retirement timer */
value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
--
1.5.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
