On Sun, Jan 24, 2021 at 02:54:06PM +0100, Jonathan Albrieux wrote:
> MSM8916 has another I2C QUP controller that can be enabled on
> GPIO 10 and 11.
>
> Add blsp_i2c3 to msm8916.dtsi and disable it by default.
>
> Signed-off-by: Jonathan Albrieux <jonathan.albri...@gmail.com>
Reviewed-by: Stephan Gerhold <step...@gerhold.net>
> ---
> arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 16 ++++++++++++++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 15 +++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> index 4dc437f13fa5..7dedb91b9930 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
> @@ -220,6 +220,22 @@
> bias-disable;
> };
>
> + i2c3_default: i2c3-default {
> + pins = "gpio10", "gpio11";
> + function = "blsp_i2c3";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c3_sleep: i2c3-sleep {
> + pins = "gpio10", "gpio11";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> i2c4_default: i2c4-default {
> pins = "gpio14", "gpio15";
> function = "blsp_i2c4";
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 402e891a84ab..1045d7e518f3 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1528,6 +1528,21 @@
> status = "disabled";
> };
>
> + blsp_i2c3: i2c@78b7000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b7000 0x500>;
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
> + clock-names = "iface", "core";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c3_default>;
> + pinctrl-1 = <&i2c3_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> blsp_spi3: spi@78b7000 {
> compatible = "qcom,spi-qup-v2.2.1";
> reg = <0x078b7000 0x500>;
> --
> 2.17.1
>
