Hi,

On Thu, Dec 17, 2020 at 12:20:31PM +0100, Paul Kocialkowski wrote:
> This introduces definitions for the PWM controller found in the V3s,
> as well as associated pins. This fashion of the controller has two PWM
> outputs and is register-compatible with the A20.
> 
> Both PWM outputs were tested on a Lichee Pi Zero with a simple
> transistor-LED setup.
> 
> Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
> ---
>  arch/arm/boot/dts/sun8i-v3s.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi 
> b/arch/arm/boot/dts/sun8i-v3s.dtsi
> index a9f5795d4e57..34a4e638c762 100644
> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
> @@ -398,6 +398,16 @@ spi0_pins: spi0-pins {
>                               pins = "PC0", "PC1", "PC2", "PC3";
>                               function = "spi0";
>                       };
> +
> +                     pwm0_pin: pwm0-pin {
> +                             pins = "PB4";
> +                             function = "pwm0";
> +                     };
> +
> +                     pwm1_pin: pwm1-pin {
> +                             pins = "PB5";
> +                             function = "pwm1";
> +                     };
>               };
>  
>               timer@1c20c00 {
> @@ -416,6 +426,14 @@ wdt0: watchdog@1c20ca0 {
>                       clocks = <&osc24M>;
>               };
>  
> +             pwm: pwm@1c21400 {
> +                     compatible = "allwinner,sun7i-a20-pwm";

We should have a (documented) v3s compatible there along with the A20

Thanks!
Maxime

Reply via email to