> What _would_ be interesting, and still not affect the boot loader proper,
> is to allow specifying multiple boot devices in /etc/lilo.conf (for e.g.
> RAID 1 setups), and then /sbin/lilo would put a boot sector on each such
> drive.
You can already do this, just specify /dev/md0 as the device to install
onto, and lilo does the rest
> This would potentially allow you to boot from the second drive if the
> first one fails, assuming the kernel does UUID or LABEL resolution for
> the root device. The kernel would boot from the first BIOS drive, and
> would match search for a UUID or LABEL as the root device.
I can confirm that this works on RedHat 6.2 + Lilo 0.21 + kernel
2.4.0-test8 and RAID1.
I have a mirrored boot drive in a pair of firewalls / routers and to test
before I put them into service I pulled hda and the machine booted fine
from hdc and baring winging about the missing disk (all the drives are
mirrored) carried on as normal. A fresh disk was put and rebuilt no
problems and was then booted off with the other disk missing.
--
Tim Fletcher - Network manager .~.
/V\ L I N U X
[EMAIL PROTECTED] // \\ >Don't fear the penguin<
[EMAIL PROTECTED] /( )\
irc: Night-Shade on quakenet ^^-^^
An NT server can be run by an idiot, and usually is.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
