On Thu, Dec 10, 2020 at 11:16:29PM +0100, Adrien Grassein wrote:
> + { .compatible = "nxp,pf8200",},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pf8x_dt_ids);
> +
> +const struct id_name id_list[] = {
> + {PF8100, "PF8100"},
> + {PF8121A, "PF8121A"},
> + {PF8200, "PF8200"},
> + {0, "???"},
> +};
It's strange to see the list terminated with this ??? entry - these
things usually have a NULL for both the ID and the string. The string
on the terminator is never used so may as well stick with the usual
pattern.
> +static int encode_phase(struct pf8x_chip *pf, int phase)
> +{
> + int ph;
> +
> + if (phase < 0)
> + return -1;
> +
> + ph = phase / 45;
> + if ((ph * 45) != phase) {
> + dev_err(pf->dev, "ignoring, illegal phase %d\n", phase);
> + return -1;
> + }
> +
> + return (ph >= 1) ? ph - 1 : 7;
As I said on the previousl review please write normal condidional
statements to improve the legibility of the code.
> +static inline struct regulator_init_data *match_init_data(int index)
> +{
> + return pf8x00_matches[index].init_data;
> +}
> +
> +static inline struct device_node *match_of_node(int index)
> +{
> + return pf8x00_matches[index].of_node;
> +}
If you need these your driver has a problem, as previously advised
please use the standard DT parsing support.
> + memcpy(pf->regulator_descs, pf8x00_regulators,
> + sizeof(pf->regulator_descs));
Why do you need to take a copy of this? The descriptors should not be
being modified.
> + num_regulators = ARRAY_SIZE(pf->regulator_descs);
> + for (i = 0; i < num_regulators; i++) {
> + struct regulator_init_data *init_data;
> + struct regulator_desc *desc;
> +
> + desc = &pf->regulator_descs[i].desc;
> + init_data = match_init_data(i);
> +
> + config.dev = &client->dev;
> + config.init_data = init_data;
> + config.driver_data = pf;
> + config.of_node = match_of_node(i);
> + config.ena_gpiod = NULL;
You've not done anything to parse the init data (which is good) so the
init data handling is at best redundant.
> + if ((i >= REG_SW1) && (i <= REG_SW7)) {
> + if (mask) {
> + ret = regmap_update_bits(pf->regmap, reg, mask,
> + val);
> + }
> +
> + if (fast_slew > 1) {
> + ret = regmap_read(pf->regmap, reg, &fast_slew);
> + fast_slew &= 0x20;
> + if (ret < 0)
> + fast_slew = 0;
> + pf->regulator_descs[i].fast_slew = fast_slew >>
> 5;
> + }
May as well just write configurations out when you parse them, no need
to defer to here and it makes things simpler.
> +module_i2c_driver(pf8x_driver);
> +
> +static void __exit pf8x_exit(void)
> +{
> + i2c_del_driver(&pf8x_driver);
> +}
> +module_exit(pf8x_exit);
Does this build cleanly? module_i2c_driver() does both the add and
delete.
signature.asc
Description: PGP signature
