Hi Yoshihiro-san,

On Fri, 2020-12-11 at 20:27 +0900, Yoshihiro Shimoda wrote:
> From: Khiem Nguyen <khiem.nguyen...@renesas.com>
> 
> Since the driver supports BD9571MWV PMIC only,
> this patch makes the functions and data structure become more generic
> so that it can support other PMIC variants as well.
> 
> Signed-off-by: Khiem Nguyen <khiem.nguyen...@renesas.com>
> [shimoda: rebase and refactor]
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> ---
>  drivers/mfd/bd9571mwv.c       | 71
> +++++++++++++++++++++++++++++++++++--------
>  include/linux/mfd/bd9571mwv.h | 18 ++---------
>  2 files changed, 62 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
> index 80c6ef0..adb9e3d 100644
> --- a/drivers/mfd/bd9571mwv.c
> +++ b/drivers/mfd/bd9571mwv.c
> @@ -3,6 +3,7 @@
>   * ROHM BD9571MWV-M MFD driver
>   *
>   * Copyright (C) 2017 Marek Vasut <marek.vasut+rene...@gmail.com>
> + * Copyright (C) 2020 Renesas Electronics Corporation
>   *
>   * Based on the TPS65086 driver
>   */
> @@ -14,6 +15,34 @@
>  
>  #include <linux/mfd/bd9571mwv.h>
>  
> +/**
> + * struct bd957x_data - internal data for the bd957x driver
> + *
> + * Internal data to distinguish bd957x variants
> + */
> +struct bd957x_data {
> +     char *part_name;
> +     const struct regmap_config *regmap_config;
> +     const struct regmap_irq_chip *irq_chip;
> +     const struct mfd_cell *cells;
> +     int num_cells;
> +};
> +
> +/**
> + * struct bd9571mwv - state holder for the bd9571mwv driver
> + *
> + * Device data may be used to access the BD9571MWV chip
> + */
> +struct bd9571mwv {
> +     struct device *dev;
> +     struct regmap *regmap;
> +     const struct bd957x_data *data;
> +
> +     /* IRQ Data */
> +     int irq;
> +     struct regmap_irq_chip_data *irq_data;
> +};
> +

I still don't see why you actually need this structure?

>  static const struct mfd_cell bd9571mwv_cells[] = {
>       { .name = "bd9571mwv-regulator", },
>       { .name = "bd9571mwv-gpio", },
> @@ -102,6 +131,14 @@ static struct regmap_irq_chip bd9571mwv_irq_chip
> = {
>       .num_irqs       = ARRAY_SIZE(bd9571mwv_irqs),
>  };
>  
> +static const struct bd957x_data bd9571mwv_data = {
> +     .part_name = BD9571MWV_PART_NAME,
> +     .regmap_config = &bd9571mwv_regmap_config,
> +     .irq_chip = &bd9571mwv_irq_chip,
> +     .cells = bd9571mwv_cells,
> +     .num_cells = ARRAY_SIZE(bd9571mwv_cells),
> +};
> +
>  static int bd9571mwv_identify(struct bd9571mwv *bd)
>  {
>       struct device *dev = bd->dev;
> @@ -127,13 +164,6 @@ static int bd9571mwv_identify(struct bd9571mwv
> *bd)
>                       ret);
>               return ret;
>       }
> -
> -     if (value != BD9571MWV_PRODUCT_CODE_VAL) {
> -             dev_err(dev, "Invalid product code ID %02x (expected
> %02x)\n",
> -                     value, BD9571MWV_PRODUCT_CODE_VAL);
> -             return -EINVAL;
> -     }
> -
>       ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_REVISION,
> &value);
>       if (ret) {
>               dev_err(dev, "Failed to read revision register
> (ret=%i)\n",
> @@ -141,7 +171,8 @@ static int bd9571mwv_identify(struct bd9571mwv
> *bd)
>               return ret;
>       }
>  
> -     dev_info(dev, "Device: BD9571MWV rev. %d\n", value & 0xff);
> +     dev_info(dev, "Device: %s rev. %d\n", bd->data->part_name,
> +              value & 0xff);
>  
>       return 0;
>  }
> @@ -160,7 +191,23 @@ static int bd9571mwv_probe(struct i2c_client
> *client,
>       bd->dev = &client->dev;
>       bd->irq = client->irq;
>  
> -     bd->regmap = devm_regmap_init_i2c(client,
> &bd9571mwv_regmap_config);
> +     /* Read the PMIC product code */
> +     ret = i2c_smbus_read_byte_data(client, BD9571MWV_PRODUCT_CODE);
> +     if (ret < 0) {
> +             dev_err(&client->dev, "failed reading at 0x%02x\n",
> +                     BD9571MWV_PRODUCT_CODE);
> +             return ret;
> +     }
> +     switch (ret) {
> +     case BD9571MWV_PRODUCT_CODE_VAL:
> +             bd->data = &bd9571mwv_data;
> +             break;
> +     default:
> +             dev_err(bd->dev, "Unsupported device 0x%x\n", ret);
> +             return -ENOENT;
> +     }
> +
> +     bd->regmap = devm_regmap_init_i2c(client, bd->data-
> >regmap_config);
>       if (IS_ERR(bd->regmap)) {
>               dev_err(bd->dev, "Failed to initialize register
> map\n");
>               return PTR_ERR(bd->regmap);
> @@ -171,14 +218,14 @@ static int bd9571mwv_probe(struct i2c_client
> *client,
>               return ret;
>  
>       ret = regmap_add_irq_chip(bd->regmap, bd->irq, IRQF_ONESHOT, 0,
> -                               &bd9571mwv_irq_chip, &bd->irq_data);
> +                               bd->data->irq_chip, &bd->irq_data);

I think you already did the big task when you cleaned up the sub-
drivers from using the struct bd9571mwv. Thumbs up for that!

So, as I said in comment to previous version - I don't see this struct
bd9571mwv being really used anywhere else but as an argument to IC
identification function and argument for the remove. I think that by
switching regmap_add_irq_chip to devm_regmap_add_irq_chip you could get
rid of the remove, error cleanup path and the i2c_clientdata. And if
you revised the arguments for identification function you could
probably further clean the struct definitions.

But as I previously said - this is only a 'nit' from me. I appreciate
your work with these drivers!

>       if (ret) {
>               dev_err(bd->dev, "Failed to register IRQ chip\n");
>               return ret;
>       }
>  
> -     ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO,
> bd9571mwv_cells,
> -                           ARRAY_SIZE(bd9571mwv_cells), NULL, 0,
> +     ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO, bd->data-
> >cells,
> +                           bd->data->num_cells, NULL, 0,
>                             regmap_irq_get_domain(bd->irq_data));
>       if (ret) {
>               regmap_del_irq_chip(bd->irq, bd->irq_data);
> diff --git a/include/linux/mfd/bd9571mwv.h
> b/include/linux/mfd/bd9571mwv.h
> index bcc7092..5ab976a 100644
> --- a/include/linux/mfd/bd9571mwv.h
> +++ b/include/linux/mfd/bd9571mwv.h
> @@ -3,6 +3,7 @@
>   * ROHM BD9571MWV-M driver
>   *
>   * Copyright (C) 2017 Marek Vasut <marek.vasut+rene...@gmail.com>
> + * Copyright (C) 2020 Renesas Electronics Corporation
>   *
>   * Based on the TPS65086 driver
>   */
> @@ -83,6 +84,8 @@
>  
>  #define BD9571MWV_ACCESS_KEY                 0xff
>  
> +#define BD9571MWV_PART_NAME                  "BD9571MWV"
> +
>  /* Define the BD9571MWV IRQ numbers */
>  enum bd9571mwv_irqs {
>       BD9571MWV_IRQ_MD1,
> @@ -94,19 +97,4 @@ enum bd9571mwv_irqs {
>       BD9571MWV_IRQ_WDT_OF,
>       BD9571MWV_IRQ_BKUP_TRG,
>  };
> -
> -/**
> - * struct bd9571mwv - state holder for the bd9571mwv driver
> - *
> - * Device data may be used to access the BD9571MWV chip
> - */
> -struct bd9571mwv {
> -     struct device *dev;
> -     struct regmap *regmap;
> -
> -     /* IRQ Data */
> -     int irq;
> -     struct regmap_irq_chip_data *irq_data;
> -};
> -
>  #endif /* __LINUX_MFD_BD9571MWV_H */


Best Regards
    Matti Vaittinen

Reply via email to