The CPPC performance capabilities are used significantly throughout
the driver. Simplify the use of them by introducing a local pointer
"caps" to point to cpu_data->perf_caps, in functions that access
performance capabilities often.

Signed-off-by: Ionela Voinescu <ionela.voine...@arm.com>
Cc: Rafael J. Wysocki <r...@rjwysocki.net>
Cc: Viresh Kumar <viresh.ku...@linaro.org>
---
 drivers/cpufreq/cppc_cpufreq.c | 40 +++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 317169453549..7cc9bd8568de 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -183,15 +183,16 @@ static int cppc_verify_policy(struct cpufreq_policy_data 
*policy)
 static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy)
 {
        struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu];
+       struct cppc_perf_caps *caps = &cpu_data->perf_caps;
        unsigned int cpu = policy->cpu;
        int ret;
 
-       cpu_data->perf_ctrls.desired_perf = cpu_data->perf_caps.lowest_perf;
+       cpu_data->perf_ctrls.desired_perf = caps->lowest_perf;
 
        ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
        if (ret)
                pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
-                        cpu_data->perf_caps.lowest_perf, cpu, ret);
+                        caps->lowest_perf, cpu, ret);
 }
 
 /*
@@ -240,11 +241,12 @@ static unsigned int 
cppc_cpufreq_get_transition_delay_us(unsigned int cpu)
 static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
        struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu];
+       struct cppc_perf_caps *caps = &cpu_data->perf_caps;
        unsigned int cpu = policy->cpu;
        int ret = 0;
 
        cpu_data->cpu = cpu;
-       ret = cppc_get_perf_caps(cpu, &cpu_data->perf_caps);
+       ret = cppc_get_perf_caps(cpu, caps);
 
        if (ret) {
                pr_debug("Err reading CPU%d perf capabilities. ret:%d\n",
@@ -253,23 +255,27 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy 
*policy)
        }
 
        /* Convert the lowest and nominal freq from MHz to KHz */
-       cpu_data->perf_caps.lowest_freq *= 1000;
-       cpu_data->perf_caps.nominal_freq *= 1000;
+       caps->lowest_freq *= 1000;
+       caps->nominal_freq *= 1000;
 
        /*
         * Set min to lowest nonlinear perf to avoid any efficiency penalty (see
         * Section 8.4.7.1.1.5 of ACPI 6.1 spec)
         */
-       policy->min = cppc_cpufreq_perf_to_khz(cpu_data, 
cpu_data->perf_caps.lowest_nonlinear_perf);
-       policy->max = cppc_cpufreq_perf_to_khz(cpu_data, 
cpu_data->perf_caps.nominal_perf);
+       policy->min = cppc_cpufreq_perf_to_khz(cpu_data,
+                                              caps->lowest_nonlinear_perf);
+       policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
+                                              caps->nominal_perf);
 
        /*
         * Set cpuinfo.min_freq to Lowest to make the full range of performance
         * available if userspace wants to use any perf between lowest & lowest
         * nonlinear perf
         */
-       policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data, 
cpu_data->perf_caps.lowest_perf);
-       policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data, 
cpu_data->perf_caps.nominal_perf);
+       policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data,
+                                                           caps->lowest_perf);
+       policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data,
+                                                           caps->nominal_perf);
 
        policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu);
        policy->shared_type = cpu_data->shared_type;
@@ -283,7 +289,7 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy 
*policy)
                        if (unlikely(i == cpu))
                                continue;
 
-                       memcpy(&all_cpu_data[i]->perf_caps, 
&cpu_data->perf_caps,
+                       memcpy(&all_cpu_data[i]->perf_caps, caps,
                               sizeof(cpu_data->perf_caps));
                }
        } else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
@@ -298,18 +304,17 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy 
*policy)
         * If 'highest_perf' is greater than 'nominal_perf', we assume CPU Boost
         * is supported.
         */
-       if (cpu_data->perf_caps.highest_perf > cpu_data->perf_caps.nominal_perf)
+       if (caps->highest_perf > caps->nominal_perf)
                boost_supported = true;
 
        /* Set policy->cur to max now. The governors will adjust later. */
-       policy->cur = cppc_cpufreq_perf_to_khz(cpu_data,
-                                       cpu_data->perf_caps.highest_perf);
-       cpu_data->perf_ctrls.desired_perf = cpu_data->perf_caps.highest_perf;
+       policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf);
+       cpu_data->perf_ctrls.desired_perf =  caps->highest_perf;
 
        ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
        if (ret)
                pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n",
-                        cpu_data->perf_caps.highest_perf, cpu, ret);
+                        caps->highest_perf, cpu, ret);
 
        return ret;
 }
@@ -368,6 +373,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
 {
        struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu];
+       struct cppc_perf_caps *caps = &cpu_data->perf_caps;
        int ret;
 
        if (!boost_supported) {
@@ -377,10 +383,10 @@ static int cppc_cpufreq_set_boost(struct cpufreq_policy 
*policy, int state)
 
        if (state)
                policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
-                                       cpu_data->perf_caps.highest_perf);
+                                                      caps->highest_perf);
        else
                policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
-                                       cpu_data->perf_caps.nominal_perf);
+                                                      caps->nominal_perf);
        policy->cpuinfo.max_freq = policy->max;
 
        ret = freq_qos_update_request(policy->max_freq_req, policy->max);
-- 
2.17.1

Reply via email to