In accordance with the driver comments the PIPE3 de-emphasis can be tunned
to be either -6dB, or -2.5dB or disabled. Let's add the de-emphasis
property restriction so the DT schema would make sure the controller DT
node is equipped with correct values.
Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index fe1b372fda80..36d4b8060d7c 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -145,6 +145,10 @@ properties:
The value driven to the PHY is controlled by the LTSSM during USB3
Compliance mode.
$ref: /schemas/types.yaml#/definitions/uint8
+ enum:
+ - 0 # -6dB de-emphasis
+ - 1 # -3.5dB de-emphasis
+ - 2 # No de-emphasis
snps,dis_u3_susphy_quirk:
description: When set core will disable USB3 suspend phy
--
2.27.0
