On 8/26/20 8:38 AM, Alexandru Ardelean wrote:
> From: Sergiu Cuciurean <sergiu.cuciur...@analog.com>
> 
> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
> 
> The patch also does a minor whitespace change to align the 'lock' with the
> 'common' field via tabs.
> 
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciur...@analog.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardel...@analog.com>
> ---
>  drivers/iio/dac/stm32-dac.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
> index 092c796fa3d9..fc636812c17e 100644
> --- a/drivers/iio/dac/stm32-dac.c
> +++ b/drivers/iio/dac/stm32-dac.c
> @@ -26,9 +26,11 @@
>  /**
>   * struct stm32_dac - private data of DAC driver
>   * @common:          reference to DAC common data
> + * @lock:            lock to protect the data buffer during regmap ops

Hi Alexandru,

I think the same patch has been sent by Sergiu already [1].
Jonathan and I had a minor comment at that time: E.g. could you please
update the comment ?

[1] https://lkml.org/lkml/2020/5/18/254

>   */
>  struct stm32_dac {
> -     struct stm32_dac_common *common;
> +     struct stm32_dac_common *common;

Is above change needed?

Best Regards,
Fabrice

> +     struct mutex            lock;
>  };
>  
>  static int stm32_dac_is_enabled(struct iio_dev *indio_dev, int channel)
> @@ -58,10 +60,10 @@ static int stm32_dac_set_enable_state(struct iio_dev 
> *indio_dev, int ch,
>       int ret;
>  
>       /* already enabled / disabled ? */
> -     mutex_lock(&indio_dev->mlock);
> +     mutex_lock(&dac->lock);
>       ret = stm32_dac_is_enabled(indio_dev, ch);
>       if (ret < 0 || enable == !!ret) {
> -             mutex_unlock(&indio_dev->mlock);
> +             mutex_unlock(&dac->lock);
>               return ret < 0 ? ret : 0;
>       }
>  
> @@ -69,13 +71,13 @@ static int stm32_dac_set_enable_state(struct iio_dev 
> *indio_dev, int ch,
>               ret = pm_runtime_get_sync(dev);
>               if (ret < 0) {
>                       pm_runtime_put_noidle(dev);
> -                     mutex_unlock(&indio_dev->mlock);
> +                     mutex_unlock(&dac->lock);
>                       return ret;
>               }
>       }
>  
>       ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, en);
> -     mutex_unlock(&indio_dev->mlock);
> +     mutex_unlock(&dac->lock);
>       if (ret < 0) {
>               dev_err(&indio_dev->dev, "%s failed\n", en ?
>                       "Enable" : "Disable");
> @@ -327,6 +329,8 @@ static int stm32_dac_probe(struct platform_device *pdev)
>       indio_dev->info = &stm32_dac_iio_info;
>       indio_dev->modes = INDIO_DIRECT_MODE;
>  
> +     mutex_init(&dac->lock);
> +
>       ret = stm32_dac_chan_of_init(indio_dev);
>       if (ret < 0)
>               return ret;
> 

Reply via email to