From: Al Cooper <al.coo...@broadcom.com>

Add Kconfig and Makefile changes to build brcmstb-usb-pinmap and
update MAINTAINERS for the new driver.

refs #SWLINUX-5537

Signed-off-by: Al Cooper <al.coo...@broadcom.com>
---
 MAINTAINERS               | 8 ++++++++
 drivers/usb/host/Kconfig  | 4 ++++
 drivers/usb/host/Makefile | 1 +
 3 files changed, 13 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index f0569cf304ca..3a44ac61899b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3527,6 +3527,14 @@ S:       Maintained
 F:     Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
 F:     drivers/usb/host/ehci-brcm.*
 
+BROADCOM BRCMSTB USB PIN MAP DRIVER
+M:     Al Cooper <alcoop...@gmail.com>
+L:     linux-...@vger.kernel.org
+L:     bcm-kernel-feedback-l...@broadcom.com
+S:     Maintained
+F:     Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
+F:     drivers/usb/host/brcmstb-usb-pinmap.c
+
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
 M:     Al Cooper <alcoop...@gmail.com>
 L:     linux-kernel@vger.kernel.org
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1cb3004ea7b2..9c285053bb0c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -109,12 +109,16 @@ endif # USB_XHCI_HCD
 config USB_EHCI_BRCMSTB
        tristate
 
+config BRCM_USB_PINMAP
+       tristate
+
 config USB_BRCMSTB
        tristate "Broadcom STB USB support"
        depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
        select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
        select USB_EHCI_BRCMSTB if USB_EHCI_HCD
        select USB_XHCI_PLATFORM if USB_XHCI_HCD
+       select BRCM_USB_PINMAP
        help
          Enables support for XHCI, EHCI and OHCI host controllers
          found in Broadcom STB SoC's.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bc731332fed9..0e63ef94790d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -90,3 +90,4 @@ obj-$(CONFIG_USB_HCD_BCMA)    += bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)      += ssb-hcd.o
 obj-$(CONFIG_USB_FOTG210_HCD)  += fotg210-hcd.o
 obj-$(CONFIG_USB_MAX3421_HCD)  += max3421-hcd.o
+obj-$(CONFIG_BRCM_USB_PINMAP)  += brcmstb-usb-pinmap.o
-- 
2.17.1

Reply via email to