On Fri 17 Jul 23:34 PDT 2020, Shaik Sajida Bhanu wrote:

> From: Veerabhadrarao Badiganti <vbadi...@codeaurora.org>
> 
> On some sc7180 based platforms where external pull is not present on cd-gpio,
> this gpio state is getting read as HIGH when sleep config is applied on it.
> This is resulting in SDcard rescan after suspend-resume even though SDcard
> is not present.
> 
> Update cd-gpio sleep config with bais-pull to fix this issue.
> 
> Also include xo clock to sdhc clocks list which will be used
> in calculating MCLK_FREQ field of DLL_CONFIG2 register.
> 

Please split this in two patches; one fixing the card detect bias and
one for adding the xo clock.


This needs Veerabhadrarao's signed-off-by as well (followed by yours).

Regards,
Bjorn

> Signed-off-by: Shaik Sajida Bhanu <sbh...@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index d78a066..8034fcc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -682,8 +682,9 @@
>                       interrupt-names = "hc_irq", "pwr_irq";
>  
>                       clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> -                                     <&gcc GCC_SDCC1_AHB_CLK>;
> -                     clock-names = "core", "iface";
> +                                     <&gcc GCC_SDCC1_AHB_CLK>,
> +                                     <&xo_board>;
> +                     clock-names = "core", "iface", "xo";
>                       interconnects = <&aggre1_noc MASTER_EMMC &mc_virt 
> SLAVE_EBI1>,
>                               <&gem_noc MASTER_APPSS_PROC &config_noc 
> SLAVE_EMMC_CFG>;
>                       interconnect-names = "sdhc-ddr","cpu-sdhc";
> @@ -1819,7 +1820,7 @@
>  
>                               pinconf-sd-cd {
>                                       pins = "gpio69";
> -                                     bias-disable;
> +                                     bias-pull-up;
>                                       drive-strength = <2>;
>                               };
>                       };
> @@ -2481,8 +2482,9 @@
>                       interrupt-names = "hc_irq", "pwr_irq";
>  
>                       clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> -                                     <&gcc GCC_SDCC2_AHB_CLK>;
> -                     clock-names = "core", "iface";
> +                                     <&gcc GCC_SDCC2_AHB_CLK>,
> +                                     <&xo_board>;
> +                     clock-names = "core", "iface", "xo";
>  
>                       interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt 
> SLAVE_EBI1>,
>                               <&gem_noc MASTER_APPSS_PROC &config_noc 
> SLAVE_SDCC_2>;
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Reply via email to