On Tue, Jul 07, 2020 at 12:13:26AM +0300, Abel Vesa wrote:
> From: Leonard Crestez <leonard.cres...@nxp.com>
> 
> Add nodes for the main interconnect of the imx8m series chips.
> 
> These nodes are bound to by devfreq and interconnect drivers.
> 
> Signed-off-by: Leonard Crestez <leonard.cres...@nxp.com>
> Signed-off-by: Abel Vesa <abel.v...@nxp.com>
> Tested-by: Martin Kepplinger <martin.kepplin...@puri.sm>
> Acked-by: Georgi Djakov <georgi.dja...@linaro.org>
> ---
> 
> Changes since v1:
>  - picked up the bindinds header which were part of the original patch
>    from Leonard
> 
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 24 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi | 24 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 24 ++++++++++++++++++++++++
>  3 files changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi 
> b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 76f040e..970d132 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mm.h>
>  
>  #include "imx8mm-pinfunc.h"
>  
> @@ -877,6 +878,29 @@
>  
>               };
>  
> +             noc: interconnect@32700000 {
> +                     compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
> +                     reg = <0x32700000 0x100000>;
> +                     clocks = <&clk IMX8MM_CLK_NOC>;
> +                     fsl,ddrc = <&ddrc>;
> +                     #interconnect-cells = <1>;
> +                     operating-points-v2 = <&noc_opp_table>;
> +
> +                     noc_opp_table: opp-table {
> +                             compatible = "operating-points-v2";
> +
> +                             opp-150M {
> +                                     opp-hz = /bits/ 64 <150000000>;
> +                             };

Please have a newline between nodes.

Shawn

> +                             opp-375M {
> +                                     opp-hz = /bits/ 64 <375000000>;
> +                             };
> +                             opp-750M {
> +                                     opp-hz = /bits/ 64 <750000000>;
> +                             };
> +                     };
> +             };
> +
>               aips4: bus@32c00000 {
>                       compatible = "fsl,aips-bus", "simple-bus";
>                       reg = <0x32c00000 0x400000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi 
> b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 9385dd7..cd38aae 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mn.h>
>  
>  #include "imx8mn-pinfunc.h"
>  
> @@ -764,6 +765,29 @@
>  
>               };
>  
> +             noc: interconnect@32700000 {
> +                     compatible = "fsl,imx8mn-noc", "fsl,imx8m-noc";
> +                     reg = <0x32700000 0x100000>;
> +                     clocks = <&clk IMX8MN_CLK_NOC>;
> +                     fsl,ddrc = <&ddrc>;
> +                     #interconnect-cells = <1>;
> +                     operating-points-v2 = <&noc_opp_table>;
> +
> +                     noc_opp_table: opp-table {
> +                             compatible = "operating-points-v2";
> +
> +                             opp-100M {
> +                                     opp-hz = /bits/ 64 <100000000>;
> +                             };
> +                             opp-600M {
> +                                     opp-hz = /bits/ 64 <600000000>;
> +                             };
> +                             opp-800M {
> +                                     opp-hz = /bits/ 64 <800000000>;
> +                             };
> +                     };
> +             };
> +
>               aips4: bus@32c00000 {
>                       compatible = "fsl,aips-bus", "simple-bus";
>                       reg = <0x32c00000 0x400000>;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi 
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index f70435c..d585650 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -11,6 +11,7 @@
>  #include "dt-bindings/input/input.h"
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/imx8mq.h>
>  #include "imx8mq-pinfunc.h"
>  
>  / {
> @@ -1045,6 +1046,29 @@
>                       };
>               };
>  
> +             noc: interconnect@32700000 {
> +                     compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +                     reg = <0x32700000 0x100000>;
> +                     clocks = <&clk IMX8MQ_CLK_NOC>;
> +                     fsl,ddrc = <&ddrc>;
> +                     #interconnect-cells = <1>;
> +                     operating-points-v2 = <&noc_opp_table>;
> +
> +                     noc_opp_table: opp-table {
> +                             compatible = "operating-points-v2";
> +
> +                             opp-133M {
> +                                     opp-hz = /bits/ 64 <133333333>;
> +                             };
> +                             opp-400M {
> +                                     opp-hz = /bits/ 64 <400000000>;
> +                             };
> +                             opp-800M {
> +                                     opp-hz = /bits/ 64 <800000000>;
> +                             };
> +                     };
> +             };
> +
>               bus@32c00000 { /* AIPS4 */
>                       compatible = "fsl,aips-bus", "simple-bus";
>                       reg = <0x32c00000 0x400000>;
> -- 
> 2.7.4
> 

Reply via email to