Hi Krzysztof

> -----Original Message-----
> From: Krzysztof Kozlowski <k...@kernel.org>
> Sent: 05 July 2020 23:48
> To: Rob Herring <robh...@kernel.org>; Kukjin Kim <kg...@kernel.org>;
> Krzysztof Kozlowski <k...@kernel.org>; devicet...@vger.kernel.org;
linux-arm-
> ker...@lists.infradead.org; linux-samsung-...@vger.kernel.org; linux-
> ker...@vger.kernel.org
> Cc: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>; Sylwester
Nawrocki
> <snawro...@kernel.org>; Alim Akhtar <alim.akh...@samsung.com>; Chanwoo
> Choi <cw00.c...@samsung.com>; Pankaj Dubey
> <pankaj.du...@samsung.com>
> Subject: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name
> to fix dtschema warnings
> 
> There is no need to keep DMA controller nodes under AMBA bus node.
> Remove the "amba" node to fix dtschema warnings like:
> 
>     amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-
> 9a-f]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
> 
Reviewed-by: Alim Akhtar <alim.akh...@samsung.com>

> ---
> 
> Changes since v2:
> 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as
suggested
> by Marek
> 
> Changes since v1:
> 1. Remove the bus, as suggested by Marek
> ---
>  arch/arm/boot/dts/exynos3250.dtsi             |  47 +++----
>  arch/arm/boot/dts/exynos4.dtsi                |  70 +++++-----
>  .../boot/dts/exynos4210-universal_c210.dts    |  28 ++--
>  arch/arm/boot/dts/exynos5250.dtsi             |  92 ++++++-------
>  arch/arm/boot/dts/exynos5410.dtsi             |  46 +++----
>  arch/arm/boot/dts/exynos5420.dtsi             | 130 ++++++++----------
>  6 files changed, 187 insertions(+), 226 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi
> b/arch/arm/boot/dts/exynos3250.dtsi
> index 044e5da64a76..d3fb45a56527 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -418,33 +418,26 @@
>                       status = "disabled";
>               };
> 
> -             amba {
> -                     compatible = "simple-bus";
> -                     #address-cells = <1>;
> -                     #size-cells = <1>;
> -                     ranges;
> -
> -                     pdma0: pdma@12680000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x12680000 0x1000>;
> -                             interrupts = <GIC_SPI 138
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&cmu CLK_PDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     pdma1: pdma@12690000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x12690000 0x1000>;
> -                             interrupts = <GIC_SPI 139
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&cmu CLK_PDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> +             pdma0: pdma@12680000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x12680000 0x1000>;
> +                     interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cmu CLK_PDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             pdma1: pdma@12690000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x12690000 0x1000>;
> +                     interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cmu CLK_PDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
>               };
> 
>               adc: adc@126c0000 {
> diff --git a/arch/arm/boot/dts/exynos4.dtsi
b/arch/arm/boot/dts/exynos4.dtsi
> index d2779a790ce3..a1e54449f33f 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -669,45 +669,37 @@
>                       status = "disabled";
>               };
> 
> -             amba: amba {
> -                     #address-cells = <1>;
> -                     #size-cells = <1>;
> -                     compatible = "simple-bus";
> -                     interrupt-parent = <&gic>;
> -                     ranges;
> -
> -                     pdma0: pdma@12680000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x12680000 0x1000>;
> -                             interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     pdma1: pdma@12690000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x12690000 0x1000>;
> -                             interrupts = <GIC_SPI 36
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     mdma1: mdma@12850000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x12850000 0x1000>;
> -                             interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_MDMA>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <1>;
> -                     };
> +             pdma0: pdma@12680000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x12680000 0x1000>;
> +                     interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             pdma1: pdma@12690000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x12690000 0x1000>;
> +                     interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             mdma1: mdma@12850000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x12850000 0x1000>;
> +                     interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_MDMA>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <1>;
>               };
> 
>               fimd: fimd@11c00000 {
> diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> index 02fde1a75ebd..99ce53b120ac 100644
> --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> @@ -181,20 +181,6 @@
>       };
>  };
> 
> -&amba {
> -     mdma0: mdma@12840000 {
> -             compatible = "arm,pl330", "arm,primecell";
> -             reg = <0x12840000 0x1000>;
> -             interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> -             clocks = <&clock CLK_MDMA>;
> -             clock-names = "apb_pclk";
> -             #dma-cells = <1>;
> -             #dma-channels = <8>;
> -             #dma-requests = <1>;
> -             power-domains = <&pd_lcd0>;
> -     };
> -};
> -
>  &camera {
>       status = "okay";
> 
> @@ -616,6 +602,20 @@
>       /delete-property/dma-names;
>  };
> 
> +&soc {
> +     mdma0: mdma@12840000 {
> +             compatible = "arm,pl330", "arm,primecell";
> +             reg = <0x12840000 0x1000>;
> +             interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +             clocks = <&clock CLK_MDMA>;
> +             clock-names = "apb_pclk";
> +             #dma-cells = <1>;
> +             #dma-channels = <8>;
> +             #dma-requests = <1>;
> +             power-domains = <&pd_lcd0>;
> +     };
> +};
> +
>  &sysram {
>       smp-sram@0 {
>               status = "disabled";
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index b6135af7ef39..e3dbe4166836 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -679,56 +679,48 @@
>                       samsung,pmureg-phandle =
> <&pmu_system_controller>;
>               };
> 
> -             amba {
> -                     #address-cells = <1>;
> -                     #size-cells = <1>;
> -                     compatible = "simple-bus";
> -                     interrupt-parent = <&gic>;
> -                     ranges;
> -
> -                     pdma0: pdma@121a0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121A0000 0x1000>;
> -                             interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     pdma1: pdma@121b0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121B0000 0x1000>;
> -                             interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     mdma0: mdma@10800000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x10800000 0x1000>;
> -                             interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_MDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <1>;
> -                     };
> -
> -                     mdma1: mdma@11c10000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x11C10000 0x1000>;
> -                             interrupts = <GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_MDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <1>;
> -                     };
> +             pdma0: pdma@121a0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121A0000 0x1000>;
> +                     interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             pdma1: pdma@121b0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121B0000 0x1000>;
> +                     interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             mdma0: mdma@10800000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x10800000 0x1000>;
> +                     interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_MDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <1>;
> +             };
> +
> +             mdma1: mdma@11c10000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x11C10000 0x1000>;
> +                     interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_MDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <1>;
>               };
> 
>               gsc_0:  gsc@13e00000 {
> diff --git a/arch/arm/boot/dts/exynos5410.dtsi
> b/arch/arm/boot/dts/exynos5410.dtsi
> index 2eab80bf5f3a..abe75b9e39f5 100644
> --- a/arch/arm/boot/dts/exynos5410.dtsi
> +++ b/arch/arm/boot/dts/exynos5410.dtsi
> @@ -189,34 +189,26 @@
>                       interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
>               };
> 
> -             amba {
> -                     #address-cells = <1>;
> -                     #size-cells = <1>;
> -                     compatible = "simple-bus";
> -                     interrupt-parent = <&gic>;
> -                     ranges;
> -
> -                     pdma0: pdma@121a0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121a0000 0x1000>;
> -                             interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> +             pdma0: pdma@121a0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121a0000 0x1000>;
> +                     interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> 
> -                     pdma1: pdma@121b0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121b0000 0x1000>;
> -                             interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> +             pdma1: pdma@121b0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121b0000 0x1000>;
> +                     interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
>               };
> 
>               audi2s0: i2s@3830000 {
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
> b/arch/arm/boot/dts/exynos5420.dtsi
> index b672080e7469..c76460b70532 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -433,76 +433,68 @@
>                       power-domains = <&mau_pd>;
>               };
> 
> -             amba {
> -                     #address-cells = <1>;
> -                     #size-cells = <1>;
> -                     compatible = "simple-bus";
> -                     interrupt-parent = <&gic>;
> -                     ranges;
> -
> -                     adma: adma@3880000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x03880000 0x1000>;
> -                             interrupts = <GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock_audss EXYNOS_ADMA>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <6>;
> -                             #dma-requests = <16>;
> -                             power-domains = <&mau_pd>;
> -                     };
> -
> -                     pdma0: pdma@121a0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121A0000 0x1000>;
> -                             interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     pdma1: pdma@121b0000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x121B0000 0x1000>;
> -                             interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_PDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <32>;
> -                     };
> -
> -                     mdma0: mdma@10800000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x10800000 0x1000>;
> -                             interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_MDMA0>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <1>;
> -                     };
> +             adma: adma@3880000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x03880000 0x1000>;
> +                     interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock_audss EXYNOS_ADMA>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <6>;
> +                     #dma-requests = <16>;
> +                     power-domains = <&mau_pd>;
> +             };
> 
> -                     mdma1: mdma@11c10000 {
> -                             compatible = "arm,pl330", "arm,primecell";
> -                             reg = <0x11C10000 0x1000>;
> -                             interrupts = <GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&clock CLK_MDMA1>;
> -                             clock-names = "apb_pclk";
> -                             #dma-cells = <1>;
> -                             #dma-channels = <8>;
> -                             #dma-requests = <1>;
> -                             /*
> -                              * MDMA1 can support both secure and non-
> secure
> -                              * AXI transactions. When this is enabled in
> -                              * the kernel for boards that run in secure
> -                              * mode, we are getting imprecise external
> -                              * aborts causing the kernel to oops.
> -                              */
> -                             status = "disabled";
> -                     };
> +             pdma0: pdma@121a0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121A0000 0x1000>;
> +                     interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             pdma1: pdma@121b0000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x121B0000 0x1000>;
> +                     interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_PDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <32>;
> +             };
> +
> +             mdma0: mdma@10800000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x10800000 0x1000>;
> +                     interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_MDMA0>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <1>;
> +             };
> +
> +             mdma1: mdma@11c10000 {
> +                     compatible = "arm,pl330", "arm,primecell";
> +                     reg = <0x11C10000 0x1000>;
> +                     interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clock CLK_MDMA1>;
> +                     clock-names = "apb_pclk";
> +                     #dma-cells = <1>;
> +                     #dma-channels = <8>;
> +                     #dma-requests = <1>;
> +                     /*
> +                      * MDMA1 can support both secure and non-secure
> +                      * AXI transactions. When this is enabled in
> +                      * the kernel for boards that run in secure
> +                      * mode, we are getting imprecise external
> +                      * aborts causing the kernel to oops.
> +                      */
> +                     status = "disabled";
>               };
> 
>               i2s0: i2s@3830000 {
> --
> 2.17.1


Reply via email to