There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:
amba: $nodename:0: 'amba' does not match
'^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
Changes since v2:
1. Keep the alphabetical order in exynos4210-universal_c210.dts, as suggested
by Marek
Changes since v1:
1. Remove the bus, as suggested by Marek
---
arch/arm/boot/dts/exynos3250.dtsi | 47 +++----
arch/arm/boot/dts/exynos4.dtsi | 70 +++++-----
.../boot/dts/exynos4210-universal_c210.dts | 28 ++--
arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++-------
arch/arm/boot/dts/exynos5410.dtsi | 46 +++----
arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++----------
6 files changed, 187 insertions(+), 226 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi
b/arch/arm/boot/dts/exynos3250.dtsi
index 044e5da64a76..d3fb45a56527 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -418,33 +418,26 @@
status = "disabled";
};
- amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma0: pdma@12680000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12680000 0x1000>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@12690000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12690000 0x1000>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cmu CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
adc: adc@126c0000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index d2779a790ce3..a1e54449f33f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -669,45 +669,37 @@
status = "disabled";
};
- amba: amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pdma0: pdma@12680000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12680000 0x1000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@12690000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12690000 0x1000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- mdma1: mdma@12850000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12850000 0x1000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma1: mdma@12850000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12850000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
fimd: fimd@11c00000 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 02fde1a75ebd..99ce53b120ac 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -181,20 +181,6 @@
};
};
-&amba {
- mdma0: mdma@12840000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x12840000 0x1000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- power-domains = <&pd_lcd0>;
- };
-};
-
&camera {
status = "okay";
@@ -616,6 +602,20 @@
/delete-property/dma-names;
};
+&soc {
+ mdma0: mdma@12840000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12840000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ power-domains = <&pd_lcd0>;
+ };
+};
+
&sysram {
smp-sram@0 {
status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
index b6135af7ef39..e3dbe4166836 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -679,56 +679,48 @@
samsung,pmureg-phandle = <&pmu_system_controller>;
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pdma0: pdma@121a0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121A0000 0x1000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@121b0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121B0000 0x1000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- mdma0: mdma@10800000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10800000 0x1000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
-
- mdma1: mdma@11c10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x11C10000 0x1000>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
+ pdma0: pdma@121a0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@121b0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma0: mdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+
+ mdma1: mdma@11c10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
gsc_0: gsc@13e00000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi
b/arch/arm/boot/dts/exynos5410.dtsi
index 2eab80bf5f3a..abe75b9e39f5 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -189,34 +189,26 @@
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pdma0: pdma@121a0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121a0000 0x1000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma0: pdma@121a0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121a0000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
- pdma1: pdma@121b0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121b0000 0x1000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma1: pdma@121b0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121b0000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
audi2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi
b/arch/arm/boot/dts/exynos5420.dtsi
index b672080e7469..c76460b70532 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -433,76 +433,68 @@
power-domains = <&mau_pd>;
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- adma: adma@3880000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x03880000 0x1000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock_audss EXYNOS_ADMA>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <6>;
- #dma-requests = <16>;
- power-domains = <&mau_pd>;
- };
-
- pdma0: pdma@121a0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121A0000 0x1000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@121b0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121B0000 0x1000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- mdma0: mdma@10800000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10800000 0x1000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
+ adma: adma@3880000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x03880000 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock_audss EXYNOS_ADMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <6>;
+ #dma-requests = <16>;
+ power-domains = <&mau_pd>;
+ };
- mdma1: mdma@11c10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x11C10000 0x1000>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_MDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- /*
- * MDMA1 can support both secure and non-secure
- * AXI transactions. When this is enabled in
- * the kernel for boards that run in secure
- * mode, we are getting imprecise external
- * aborts causing the kernel to oops.
- */
- status = "disabled";
- };
+ pdma0: pdma@121a0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@121b0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma0: mdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+
+ mdma1: mdma@11c10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ /*
+ * MDMA1 can support both secure and non-secure
+ * AXI transactions. When this is enabled in
+ * the kernel for boards that run in secure
+ * mode, we are getting imprecise external
+ * aborts causing the kernel to oops.
+ */
+ status = "disabled";
};
i2s0: i2s@3830000 {
--
2.17.1
