Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski <k...@kernel.org>
> Sent: 30 June 2020 02:15
> To: Rob Herring <robh...@kernel.org>; Kukjin Kim <kg...@kernel.org>;
> Krzysztof Kozlowski <k...@kernel.org>; devicet...@vger.kernel.org;
linux-arm-
> ker...@lists.infradead.org; linux-samsung-...@vger.kernel.org; linux-
> ker...@vger.kernel.org
> Cc: Marek Szyprowski <m.szyprow...@samsung.com>; Bartlomiej Zolnierkiewicz
> <b.zolnier...@samsung.com>; Sylwester Nawrocki <snawro...@kernel.org>;
> Alim Akhtar <alim.akh...@samsung.com>; Chanwoo Choi
> <cw00.c...@samsung.com>; Pankaj Dubey <pankaj.du...@samsung.com>
> Subject: [PATCH 1/4] arm64: dts: exynos: Add PWM interrupts on Exynos7
>
> Add required interrupts to PWM node on Exynos7. This fixes DT schema
> warning:
>
> pwm@136c0000: 'interrupts' is a required property
>
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
>
> ---
>
> Not tested
> ---
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index f590891efe25..523547b3d539 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -581,6 +581,11 @@
> pwm: pwm@136c0000 {
> compatible = "samsung,exynos4210-pwm";
> reg = <0x136c0000 0x100>;
> + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
PWM IRQs are from 449 ~ 453 for PWM[0] ~ PWM[4] on this SoC.
444 ~ 447 are for HSI2C and 448 is for ADC.
Please see the exynos7.dtsi
Also drivers/pwm/pwm-samsung.c does not uses interrupt at all, still we need
interrupts property to be added here?
> samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> #pwm-cells = <3>;
> clocks = <&clock_peric0 PCLK_PWM>;
> --
> 2.17.1
