On Wed, May 20, 2020 at 07:10:06PM +0200, Roelof Berg wrote:

Hi Roelof

Here is how i would do this. I don't like this MII bus snooping. It is
a microchip propriety's thing, which is not well understood. It adds
no value over just doing what every other MAC driver does in the
link_change callback, which lots of people understand.

I also removed all OF handing from within the callback. And i unified
fixed-link and normal PHY.

This is compile tested only, so is probably broken...

     Andrew


diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c 
b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 3a0b289d9771..c533d06fbe3a 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -2,11 +2,11 @@
 /* Copyright (C) 2018 Microchip Technology Inc. */
 
 #include <linux/netdevice.h>
-#include "lan743x_main.h"
-#include "lan743x_ethtool.h"
 #include <linux/net_tstamp.h>
 #include <linux/pci.h>
 #include <linux/phy.h>
+#include "lan743x_main.h"
+#include "lan743x_ethtool.h"
 
 /* eeprom */
 #define LAN743X_EEPROM_MAGIC               (0x74A5)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c 
b/drivers/net/ethernet/microchip/lan743x_main.c
index a43140f7b5eb..5aaa0ac96970 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -8,7 +8,10 @@
 #include <linux/crc32.h>
 #include <linux/microchipphy.h>
 #include <linux/net_tstamp.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
 #include <linux/phy.h>
+#include <linux/phy_fixed.h>
 #include <linux/rtnetlink.h>
 #include <linux/iopoll.h>
 #include <linux/crc16.h>
@@ -798,9 +801,9 @@ static int lan743x_mac_init(struct lan743x_adapter *adapter)
 
        netdev = adapter->netdev;
 
-       /* setup auto duplex, and speed detection */
+       /* disable auto duplex, and speed detection. Phylib does that */
        data = lan743x_csr_read(adapter, MAC_CR);
-       data |= MAC_CR_ADD_ | MAC_CR_ASD_;
+       data &= ~(MAC_CR_ADD_ | MAC_CR_ASD_);
        data |= MAC_CR_CNTR_RST_;
        lan743x_csr_write(adapter, MAC_CR, data);
 
@@ -946,6 +949,7 @@ static void lan743x_phy_link_status_change(struct 
net_device *netdev)
 {
        struct lan743x_adapter *adapter = netdev_priv(netdev);
        struct phy_device *phydev = netdev->phydev;
+       u32 data;
 
        phy_print_status(phydev);
        if (phydev->state == PHY_RUNNING) {
@@ -953,6 +957,39 @@ static void lan743x_phy_link_status_change(struct 
net_device *netdev)
                int remote_advertisement = 0;
                int local_advertisement = 0;
 
+               data = lan743x_csr_read(adapter, MAC_CR);
+
+               /* set interface mode */
+               if (phy_interface_mode_is_rgmii(adapter->phy_mode))
+                       /* RGMII */
+                       data &= ~MAC_CR_MII_EN_;
+               else
+                       /* GMII */
+                       data |= MAC_CR_MII_EN_;
+
+               /* set fixed duplex mode */
+               if (phydev->duplex)
+                       data |= MAC_CR_DPX_;
+               else
+                       data &= ~MAC_CR_DPX_;
+
+               /* set fixed bus speed */
+               switch (phydev->speed) {
+               case SPEED_10:
+                       data &= ~MAC_CR_CFG_H_;
+                       data &= ~MAC_CR_CFG_L_;
+                       break;
+               case SPEED_100:
+                       data &= ~MAC_CR_CFG_H_;
+                       data |= MAC_CR_CFG_L_;
+                       break;
+               case SPEED_1000:
+                       data |= MAC_CR_CFG_H_;
+                       data |= MAC_CR_CFG_L_;
+                       break;
+               }
+               lan743x_csr_write(adapter, MAC_CR, data);
+
                memset(&ksettings, 0, sizeof(ksettings));
                phy_ethtool_get_link_ksettings(netdev, &ksettings);
                local_advertisement =
@@ -974,26 +1011,53 @@ static void lan743x_phy_close(struct lan743x_adapter 
*adapter)
 
        phy_stop(netdev->phydev);
        phy_disconnect(netdev->phydev);
+       if (of_phy_is_fixed_link(adapter->pdev->dev.of_node))
+               of_phy_deregister_fixed_link(adapter->pdev->dev.of_node);
        netdev->phydev = NULL;
 }
 
 static int lan743x_phy_open(struct lan743x_adapter *adapter)
 {
        struct lan743x_phy *phy = &adapter->phy;
+       struct device_node *phynode;
        struct phy_device *phydev;
        struct net_device *netdev;
        int ret = -EIO;
 
        netdev = adapter->netdev;
-       phydev = phy_find_first(adapter->mdiobus);
-       if (!phydev)
-               goto return_error;
 
-       ret = phy_connect_direct(netdev, phydev,
-                                lan743x_phy_link_status_change,
-                                PHY_INTERFACE_MODE_GMII);
-       if (ret)
-               goto return_error;
+       phynode = of_node_get(adapter->pdev->dev.of_node);
+       adapter->phy_mode = PHY_INTERFACE_MODE_GMII;
+
+       if (phynode) {
+               of_get_phy_mode(phynode, &adapter->phy_mode);
+
+               if (of_phy_is_fixed_link(phynode)) {
+                       ret = of_phy_register_fixed_link(phynode);
+                       if (ret) {
+                               netdev_err(netdev,
+                                          "cannot register fixed PHY\n");
+                               of_node_put(phynode);
+                               goto return_error;
+                       }
+               }
+               phydev = of_phy_connect(netdev, phynode,
+                                       lan743x_phy_link_status_change, 0,
+                                       adapter->phy_mode);
+               of_node_put(phynode);
+               if (!phydev)
+                       goto return_error;
+       } else {
+               phydev = phy_find_first(adapter->mdiobus);
+               if (!phydev)
+                       goto return_error;
+
+               ret = phy_connect_direct(netdev, phydev,
+                                        lan743x_phy_link_status_change,
+                                        adapter->phy_mode);
+               if (ret)
+                       goto return_error;
+       }
 
        /* MAC doesn't support 1000T Half */
        phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h 
b/drivers/net/ethernet/microchip/lan743x_main.h
index 3b02eeae5f45..f769903538e4 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -104,10 +104,14 @@
        ((value << 0) & FCT_FLOW_CTL_ON_THRESHOLD_)
 
 #define MAC_CR                         (0x100)
+#define MAC_CR_MII_EN_                 BIT(19)
 #define MAC_CR_EEE_EN_                 BIT(17)
 #define MAC_CR_ADD_                    BIT(12)
 #define MAC_CR_ASD_                    BIT(11)
 #define MAC_CR_CNTR_RST_               BIT(5)
+#define MAC_CR_DPX_                    BIT(3)
+#define MAC_CR_CFG_H_                  BIT(2)
+#define MAC_CR_CFG_L_                  BIT(1)
 #define MAC_CR_RST_                    BIT(0)
 
 #define MAC_RX                         (0x104)
@@ -698,6 +702,7 @@ struct lan743x_rx {
 struct lan743x_adapter {
        struct net_device       *netdev;
        struct mii_bus          *mdiobus;
+       phy_interface_t         phy_mode;
        int                     msg_enable;
 #ifdef CONFIG_PM
        u32                     wolopts;
diff --git a/drivers/net/ethernet/microchip/lan743x_ptp.c 
b/drivers/net/ethernet/microchip/lan743x_ptp.c
index 9399f6a98748..b1df214a6973 100644
--- a/drivers/net/ethernet/microchip/lan743x_ptp.c
+++ b/drivers/net/ethernet/microchip/lan743x_ptp.c
@@ -2,12 +2,12 @@
 /* Copyright (C) 2018 Microchip Technology Inc. */
 
 #include <linux/netdevice.h>
-#include "lan743x_main.h"
-
+#include <linux/phy.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/net_tstamp.h>
+#include "lan743x_main.h"
 
 #include "lan743x_ptp.h"
 

Reply via email to