Add documentation about device operating mode and output data range supported according to operating mode
Signed-off-by: Saravanan Sekar <[email protected]> --- .../ABI/testing/sysfs-bus-iio-wsen-itds | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-wsen-itds diff --git a/Documentation/ABI/testing/sysfs-bus-iio-wsen-itds b/Documentation/ABI/testing/sysfs-bus-iio-wsen-itds new file mode 100644 index 000000000000..5979f2b8aa1a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-wsen-itds @@ -0,0 +1,23 @@ +What: /sys/bus/iio/devices/iio\:device0/in_accel_samp_freq_available +KernelVersion: 5.7 +Contact: [email protected] +Description: + Reading gives range of sample frequencies available for current operating mode + after one data has generated. + + Access: Read + Valid values: represented in Hz + - range [12.5, 1600] for high permormance mode + - range [1.6, 200] for normal/low power mode + +What: /sys/bus/iio/devices/iio\:device0/operating_mode +KernelVersion: 5.7 +Contact: [email protected] +Description: + Represents the device operating mode. High performance mode gives high output + data rate and low noise compared to normal mode. Normal mode consumes less + current. In single shot device enters to lowpower after one data has + generated. + + Access: Read, Write + Valid values: "lowpower", "normal", "high_perf", "single_shot" -- 2.17.1
