On 18/10/2019 18:29, Christian Hewitt wrote: > Move VIM3 audio nodes to meson-khadas-vim3.dtsi to enable audio for all > boards in the VIM3 family including VIM3L. > > This change depends on [1] being merged/applied first. > > [1] https://patchwork.kernel.org/patch/11198535/ > > Signed-off-by: Christian Hewitt <christianshew...@gmail.com> > --- > .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 89 > ---------------------- > arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 88 +++++++++++++++++++++ > 2 files changed, 88 insertions(+), 89 deletions(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi > b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi > index 69019d0..190e934 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi > @@ -5,8 +5,6 @@ > * Copyright (c) 2019 Christian Hewitt <christianshew...@gmail.com> > */ > > -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> > - > / { > vddcpu_a: regulator-vddcpu-a { > /* > @@ -45,69 +43,6 @@ > regulator-boot-on; > regulator-always-on; > }; > - > - sound { > - compatible = "amlogic,axg-sound-card"; > - model = "G12A-KHADAS-VIM3"; > - audio-aux-devs = <&tdmout_b>; > - audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", > - "TDMOUT_B IN 1", "FRDDR_B OUT 1", > - "TDMOUT_B IN 2", "FRDDR_C OUT 1", > - "TDM_B Playback", "TDMOUT_B OUT"; > - > - assigned-clocks = <&clkc CLKID_MPLL2>, > - <&clkc CLKID_MPLL0>, > - <&clkc CLKID_MPLL1>; > - assigned-clock-parents = <0>, <0>, <0>; > - assigned-clock-rates = <294912000>, > - <270950400>, > - <393216000>; > - status = "okay"; > - > - dai-link-0 { > - sound-dai = <&frddr_a>; > - }; > - > - dai-link-1 { > - sound-dai = <&frddr_b>; > - }; > - > - dai-link-2 { > - sound-dai = <&frddr_c>; > - }; > - > - /* 8ch hdmi interface */ > - dai-link-3 { > - sound-dai = <&tdmif_b>; > - dai-format = "i2s"; > - dai-tdm-slot-tx-mask-0 = <1 1>; > - dai-tdm-slot-tx-mask-1 = <1 1>; > - dai-tdm-slot-tx-mask-2 = <1 1>; > - dai-tdm-slot-tx-mask-3 = <1 1>; > - mclk-fs = <256>; > - > - codec { > - sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; > - }; > - }; > - > - /* hdmi glue */ > - dai-link-4 { > - sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; > - > - codec { > - sound-dai = <&hdmi_tx>; > - }; > - }; > - }; > -}; > - > -&arb { > - status = "okay"; > -}; > - > -&clkc_audio { > - status = "okay"; > }; > > &cpu0 { > @@ -152,18 +87,6 @@ > clock-latency = <50000>; > }; > > -&frddr_a { > - status = "okay"; > -}; > - > -&frddr_b { > - status = "okay"; > -}; > - > -&frddr_c { > - status = "okay"; > -}; > - > &pwm_ab { > pinctrl-0 = <&pwm_a_e_pins>; > pinctrl-names = "default"; > @@ -179,15 +102,3 @@ > clock-names = "clkin1"; > status = "okay"; > }; > - > -&tdmif_b { > - status = "okay"; > -}; > - > -&tdmout_b { > - status = "okay"; > -}; > - > -&tohdmitx { > - status = "okay"; > -}; > diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > index 90815fa..3f5c373 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi > @@ -7,6 +7,7 @@ > > #include <dt-bindings/input/input.h> > #include <dt-bindings/gpio/meson-g12a-gpio.h> > +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> > > / { > model = "Khadas VIM3"; > @@ -76,6 +77,61 @@ > clock-names = "ext_clock"; > }; > > + sound { > + compatible = "amlogic,axg-sound-card"; > + model = "G12A-KHADAS-VIM3"; > + audio-aux-devs = <&tdmout_b>; > + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", > + "TDMOUT_B IN 1", "FRDDR_B OUT 1", > + "TDMOUT_B IN 2", "FRDDR_C OUT 1", > + "TDM_B Playback", "TDMOUT_B OUT"; > + > + assigned-clocks = <&clkc CLKID_MPLL2>, > + <&clkc CLKID_MPLL0>, > + <&clkc CLKID_MPLL1>; > + assigned-clock-parents = <0>, <0>, <0>; > + assigned-clock-rates = <294912000>, > + <270950400>, > + <393216000>; > + status = "okay"; > + > + dai-link-0 { > + sound-dai = <&frddr_a>; > + }; > + > + dai-link-1 { > + sound-dai = <&frddr_b>; > + }; > + > + dai-link-2 { > + sound-dai = <&frddr_c>; > + }; > + > + /* 8ch hdmi interface */ > + dai-link-3 { > + sound-dai = <&tdmif_b>; > + dai-format = "i2s"; > + dai-tdm-slot-tx-mask-0 = <1 1>; > + dai-tdm-slot-tx-mask-1 = <1 1>; > + dai-tdm-slot-tx-mask-2 = <1 1>; > + dai-tdm-slot-tx-mask-3 = <1 1>; > + mclk-fs = <256>; > + > + codec { > + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; > + }; > + }; > + > + /* hdmi glue */ > + dai-link-4 { > + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; > + > + codec { > + sound-dai = <&hdmi_tx>; > + }; > + }; > + }; > + > dc_in: regulator-dc_in { > compatible = "regulator-fixed"; > regulator-name = "DC_IN"; > @@ -171,6 +227,14 @@ > }; > }; > > +&arb { > + status = "okay"; > +}; > + > +&clkc_audio { > + status = "okay"; > +}; > + > &cec_AO { > pinctrl-0 = <&cec_ao_a_h_pins>; > pinctrl-names = "default"; > @@ -206,6 +270,18 @@ > amlogic,tx-delay-ns = <2>; > }; > > +&frddr_a { > + status = "okay"; > +}; > + > +&frddr_b { > + status = "okay"; > +}; > + > +&frddr_c { > + status = "okay"; > +}; > + > &hdmi_tx { > status = "okay"; > pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; > @@ -328,6 +404,18 @@ > vqmmc-supply = <&emmc_1v8>; > }; > > +&tdmif_b { > + status = "okay"; > +}; > + > +&tdmout_b { > + status = "okay"; > +}; > + > +&tohdmitx { > + status = "okay"; > +}; > + > &uart_A { > status = "okay"; > pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; >
Acked-by: Neil Armstrong <narmstr...@baylibre.com>
