[Patch 8/9] arm64: dts: k3-am65-main Add CAL node

[Benoit Parrot]

Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.

Signed-off-by: Benoit Parrot <bpar...@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi 
b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..9bd9a74d5e33 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -516,4 +516,27 @@
                dma-coherent;
                interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
        };
+
+       cal: cal@6f03000 {
+               compatible = "ti,am654-cal";
+               reg = <0x0 0x06f03000 0x0 0x400>,
+                     <0x0 0x06f03800 0x0 0x40>;
+               reg-names = "cal_top",
+                           "cal_rx_core0";
+               interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+               syscon-camerrx = <&scm_conf 0x40c0>;
+               clock-names = "fck";
+               clocks = <&k3_clks 2 0>;
+               power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+               status = "disabled";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       csi2_0: port@0 {
+                               reg = <0>;
+                       };
+               };
+       };
 };
-- 
2.17.1