[Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes

[Benoit Parrot]

Add device nodes for CSI2 camera board OV5640.
Add the CAL port nodes with the necessary linkage to the ov5640 nodes.

Signed-off-by: Benoit Parrot <bpar...@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..c9fdf62c68e9 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -116,6 +116,12 @@
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
        };
+
+       clk_ov5640_fixed: clk_ov5640_fixed {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <24000000>;
+       };
 };
 
 &i2c1 {
@@ -317,6 +323,27 @@
        };
 };
 
+&i2c5 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       ov5640@3c {
+               compatible = "ovti,ov5640";
+               reg = <0x3c>;
+
+               clocks = <&clk_ov5640_fixed>;
+               clock-names = "xclk";
+
+               port {
+                       csi2_cam0: endpoint {
+                               remote-endpoint = <&csi2_phy0>;
+                               clock-lanes = <0>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
 &cpu0 {
        vdd-supply = <&buck10_reg>;
 };
@@ -447,3 +474,15 @@
                max-bitrate = <5000000>;
        };
 };
+
+&cal {
+       status = "okay";
+};
+
+&csi2_0 {
+       csi2_phy0: endpoint@0 {
+               remote-endpoint = <&csi2_cam0>;
+               clock-lanes = <0>;
+               data-lanes = <1 2>;
+       };
+};
-- 
2.17.1