On 18-10-19, 06:55, Sudeep Holla wrote:
> On Thu, Oct 17, 2019 at 11:26:54PM +0200, Rafael J. Wysocki wrote:
> > On Thu, Oct 17, 2019 at 9:36 PM Rafael J. Wysocki <raf...@kernel.org> wrote:
> > >
> > > On Thu, Oct 17, 2019 at 6:35 PM Sudeep Holla <sudeep.ho...@arm.com> wrote:
> > > >
> > > > dev_pm_qos_remove_request ends calling {max,min}_freq_req QoS notifiers
> > > > which schedule policy update work. It may end up racing with the freeing
> > > > the policy and unregistering the driver.
> > > >
> > > > One possible race is as below where the cpufreq_driver is unregistered
> > > > but the scheduled work gets executed at later stage when cpufreq_driver
> > > > is NULL(i.e. after freeing the policy and driver)
> > > >
> > > > Unable to handle kernel NULL pointer dereference at virtual address
> > > > 0000001c
> > > > pgd = (ptrval)
> > > > [0000001c] *pgd=80000080204003, *pmd=00000000
> > > > Internal error: Oops: 206 [#1] SMP THUMB2
> > > > Modules linked in:
> > > > CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted
> > > > 5.4.0-rc3-00006-g67f5a8081a4b #86
> > > > Hardware name: ARM-Versatile Express
> > > > Workqueue: events handle_update
> > > > PC is at cpufreq_set_policy+0x58/0x228
> > > > LR is at dev_pm_qos_read_value+0x77/0xac
> > > > Control: 70c5387d Table: 80203000 DAC: fffffffd
> > > > Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval))
> > > > (cpufreq_set_policy) from
> > > > (refresh_frequency_limits.part.24+0x37/0x48)
> > > > (refresh_frequency_limits.part.24) from
> > > > (handle_update+0x2f/0x38)
> > > > (handle_update) from (process_one_work+0x16d/0x3cc)
> > > > (process_one_work) from (worker_thread+0xff/0x414)
> > > > (worker_thread) from (kthread+0xff/0x100)
> > > > (kthread) from (ret_from_fork+0x11/0x28)
> > > >
> > > > Cc: "Rafael J. Wysocki" <r...@rjwysocki.net>
> > > > Cc: Viresh Kumar <viresh.ku...@linaro.org>
> > > > Signed-off-by: Sudeep Holla <sudeep.ho...@arm.com>
> > > > ---
> > > > drivers/cpufreq/cpufreq.c | 3 +++
> > > > 1 file changed, 3 insertions(+)
> > > >
> > > > Hi Rafael, Viresh,
> > > >
> > > > This fixed the boot issue I reported[1] on TC2 with bL switcher enabled.
> > > > I have based this patch on -rc3 and not on top of your patches. This
> > > > only fixes the boot issue but I hit the other crashes while continuously
> > > > switching on and off the bL switcher that register/unregister the driver
> > > > Your patch series fixes them. I can based this on top of those if you
> > > > prefer.
> > > >
> > > > Regards,
> > > > Sudeep
> > > >
> > > > [1] https://lore.kernel.org/linux-pm/20191015155735.GA29105@bogus/
> > > >
> > > > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> > > > index c52d6fa32aac..b703c29a84be 100644
> > > > --- a/drivers/cpufreq/cpufreq.c
> > > > +++ b/drivers/cpufreq/cpufreq.c
> > > > @@ -1278,6 +1278,9 @@ static void cpufreq_policy_free(struct
> > > > cpufreq_policy *policy)
> > > > }
> > > >
> > > > dev_pm_qos_remove_request(policy->min_freq_req);
> > > > + /* flush the pending policy->update work before freeing the
> > > > policy */
> > > > + if (work_pending(&policy->update))
> > >
> > > Isn't this racy?
> > >
> > > It still may be running if the pending bit is clear and we still need
> > > to wait for it then, don't we?
> > >
> > > Why don't you do an unconditional flush_work() here?
> >
> > You may as well do a cancel_work_sync() here, because whether or not
> > the last update of the policy happens before it goes away is a matter
> > of timing in any case
>
> In fact that's the first thing I tried to fix the issue I was seeing.
> But I then thought it would be better to complete the update as the PM
> QoS were getting updated back to DEFAULT values for the device. Even
> this works.
>
> What is your preference ? flush_work or cancel_work_sync ? I will
> update accordingly. I may need to do some more testing with
> cancel_work_sync as I just checked that quickly to confirm the race.
As I said in the other email, this work didn't come as a result of
removal of the qos request from cpufreq core and so must have come
from other thermal or similar events. In that case maybe doing
flush_work() is better before we remove the cpufreq driver. Though
Rafael's timing related comment makes sense as well, but now that we
have received the work before policy is removed, I will rather
complete the work and quit.
--
viresh
