Hi Navid,
Thanks for the patch.
On 9/18/19 9:04 PM, Navid Emamdoost wrote:
In sja1105_static_config_upload, in two cases memory is leaked: when
static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx
fails. In both cases config_buf should be released.
Fixes: 8aa9ebccae876 (avoid leaking config_buf)
Fixes: 1a4c69406cc1c (avoid leaking config_buf)
You're not supposed to add a short description of the patch here, but
rather the commit message of the patch you're fixing.
Add this to your ~/.gitconfig:
[pretty]
fixes = Fixes: %h (\"%s\")
And then run:
git show --pretty=fixes 8aa9ebccae87621d997707e4f25e53fddd7e30e4
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port
L2 switch")
git show --pretty=fixes 1a4c69406cc1c3c42bb7391c8eb544e93fe9b320
Fixes: 1a4c69406cc1 ("net: dsa: sja1105: Prevent PHY jabbering during
switch reset")
Signed-off-by: Navid Emamdoost <navid.emamdo...@gmail.com>
---
drivers/net/dsa/sja1105/sja1105_spi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c
b/drivers/net/dsa/sja1105/sja1105_spi.c
index 84dc603138cf..58dd37ecde17 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -409,7 +409,8 @@ int sja1105_static_config_upload(struct sja1105_private
*priv)
rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Invalid config, cannot upload\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* Prevent PHY jabbering during switch reset by inhibiting
* Tx on all ports and waiting for current packet to drain.
@@ -418,7 +419,8 @@ int sja1105_static_config_upload(struct sja1105_private
*priv)
rc = sja1105_inhibit_tx(priv, port_bitmap, true);
if (rc < 0) {
dev_err(dev, "Failed to inhibit Tx on ports\n");
- return -ENXIO;
+ rc = -ENXIO;
+ goto out;
}
/* Wait for an eventual egress packet to finish transmission
* (reach IFG). It is guaranteed that a second one will not
Regards,
-Vladimir
