Hi Scott,
Thanks for reviewing and your comments
On Tue, Sep 10, 2019 at 9:34 PM Scott Branden
<scott.bran...@broadcom.com> wrote:
>
> Hi Sheetal,
>
> Some comments inline.
>
> On 2019-09-10 8:17 a.m., Sheetal Tigadoli wrote:
> > From: Vikas Gupta <vikas.gu...@broadcom.com>
> >
> > This driver registers on TEE bus to interact with OP-TEE based
> > BNXT firmware management modules
> >
> > Signed-off-by: Vikas Gupta <vikas.gu...@broadcom.com>
> > Signed-off-by: Sheetal Tigadoli <sheetal.tigad...@broadcom.com>
> > ---
> > drivers/firmware/broadcom/Kconfig | 8 +
> > drivers/firmware/broadcom/Makefile | 1 +
> > drivers/firmware/broadcom/tee_bnxt_fw.c | 447
> > ++++++++++++++++++++++++++
> > include/linux/firmware/broadcom/tee_bnxt_fw.h | 17 +
> > 4 files changed, 473 insertions(+)
> > create mode 100644 drivers/firmware/broadcom/tee_bnxt_fw.c
> > create mode 100644 include/linux/firmware/broadcom/tee_bnxt_fw.h
> >
> > diff --git a/drivers/firmware/broadcom/Kconfig
> > b/drivers/firmware/broadcom/Kconfig
> > index 6468082..a846a21 100644
> > --- a/drivers/firmware/broadcom/Kconfig
> > +++ b/drivers/firmware/broadcom/Kconfig
> > @@ -22,3 +22,11 @@ config BCM47XX_SPROM
> > In case of SoC devices SPROM content is stored on a flash used by
> > bootloader firmware CFE. This driver provides method to ssb and bcma
> > drivers to read SPROM on SoC.
> > +
> > +config TEE_BNXT_FW
> > + bool "Broadcom BNXT firmware manager"
> > + depends on ARCH_BCM_IPROC && OPTEE
> > + default ARCH_BCM_IPROC
> > + help
> > + This module help to manage firmware on Broadcom BNXT device. The
> > module
> > + registers on tee bus and invoke calls to manage firmware on BNXT
> > device.
> > diff --git a/drivers/firmware/broadcom/Makefile
> > b/drivers/firmware/broadcom/Makefile
> > index 72c7fdc..17c5061 100644
> > --- a/drivers/firmware/broadcom/Makefile
> > +++ b/drivers/firmware/broadcom/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
> > obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
> > +obj-$(CONFIG_TEE_BNXT_FW) += tee_bnxt_fw.o
> > diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c
> > b/drivers/firmware/broadcom/tee_bnxt_fw.c
> > new file mode 100644
> > index 00000000..89a48fd
> > --- /dev/null
> > +++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
> > @@ -0,0 +1,447 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright 2019 Broadcom.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/tee_drv.h>
> > +#include <linux/uuid.h>
> > +
> > +#include <linux/firmware/broadcom/tee_bnxt_fw.h>
> > +
> > +#define DRIVER_NAME "tee-bnxt-fw"
> > +
> > +#define MAX_SHM_MEM_SZ SZ_4M
> > +
> > +#define MAX_TEE_PARAM_ARRY_MEMB 4
> > +
> > +enum ta_cmd {
> > +/*
> > + * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
> > + *
> > + * param[0] unused
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
> > + */
> > + TA_CMD_BNXT_FASTBOOT = 0,
> > +
> > +/*
> > + * TA_CMD_BNXT_HEALTH_STATUS - to check health of bnxt device
> > + *
> > + * param[0] (out value) - value.a: health status
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_HEALTH_STATUS,
> > +
> > +/*
> > + * TA_CMD_BNXT_HANDSHAKE - to check bnxt device is booted
> > + *
> > + * param[0] (in value) - value.a: max timeout value
> > + * param[0] (out value) - value.a: boot status
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_HANDSHAKE,
> > +
> > +/*
> > + * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
> > + *
> > + * param[0] (in value) - value.a: offset at which data to be copied from
> > + * value.b: size of the data
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + * TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
> > + */
> > + TA_CMD_BNXT_COPY_COREDUMP,
> > +
> > +/*
> > + * TA_CMD_BNXT_FW_UPGRADE - upgrade the bnxt firmware
> > + *
> > + * param[0] (in value) - value.a: size of the f/w image
> > + * param[1] unused
> > + * param[2] unused
> > + * param[3] unused
> > + *
> > + * Result:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + */
> > + TA_CMD_BNXT_FW_UPGRADE,
> > +};
> > +
> > +/**
> > + * struct tee_bnxt_fw_private - OP-TEE bnxt private data
> > + * @dev: OP-TEE based bnxt device.
> > + * @ctx: OP-TEE context handler.
> > + * @session_id: TA session identifier.
> > + */
> > +struct tee_bnxt_fw_private {
> > + struct device *dev;
> > + struct tee_context *ctx;
> > + u32 session_id;
> > + struct tee_shm *fw_shm_pool;
> > +};
> > +
> > +static struct tee_bnxt_fw_private pvt_data;
> > +
> > +static inline void prepare_args(int cmd,
> > + struct tee_ioctl_invoke_arg *inv_arg,
> > + struct tee_param *param)
> > +{
> > + memset(inv_arg, 0, sizeof(*inv_arg));
> > + memset(param, 0, (MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param)));
> I question why both of these need to be memset to 0.
> Seems unnecessary as you are filling them in below.
In tee client api lib these structures are cleared, possibly to be
safe and may be op-tee implementation can have this assumption.
but I'll reconfirm
> > +
> > + inv_arg->func = cmd;
> > + inv_arg->session = pvt_data.session_id;
> > + inv_arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
> > +
> > + /* Fill invoke cmd params */
> > + switch (cmd) {
> > + case TA_CMD_BNXT_HEALTH_STATUS:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> > + break;
> > + case TA_CMD_BNXT_HANDSHAKE:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
> > + break;
> > + case TA_CMD_BNXT_COPY_COREDUMP:
> > + case TA_CMD_BNXT_FW_UPGRADE:
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> > + param[0].u.memref.shm = pvt_data.fw_shm_pool;
> > + param[0].u.memref.size = MAX_SHM_MEM_SZ;
> > + param[0].u.memref.shm_offs = 0;
> > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> > + break;
> > + case TA_CMD_BNXT_FASTBOOT:
> > + default:
> > + /* Nothing to do */
> > + break;
> > + }
> > +}
> > +
> > +/**
> > + * tee_bnxt_fw_load() - Load the bnxt firmware
> > + * Uses an OP-TEE call to start a secure
> > + * boot process.
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int tee_bnxt_fw_load(void)
> > +{
> > + int ret = 0;
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + prepare_args(TA_CMD_BNXT_FASTBOOT, &inv_arg, param);
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev, "TA_CMD_BNXT_LOAD invoke err: %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> Please change print. There is no way of knowing if the return value on
> error is from the ret or inv_arg.ret
Will update this
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(tee_bnxt_fw_load);
> > +
> > +/**
> > + * tee_bnxt_health_status() - Get the health status
> > + * Uses an OP-TEE call to get health
> > + * status of bnxt device.
> > + * @status: status is returned on this pointer
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int tee_bnxt_health_status(u32 *status)
> > +{
> > + int ret = 0;
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + prepare_args(TA_CMD_BNXT_HEALTH_STATUS, &inv_arg, param);
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev, "TA_CMD_BNXT_HEALTH_STATUS invoke err:
> > %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> > Please change print. There is no way of knowing if the return value on
> > error is from the ret or inv_arg.ret
Will update this
> >
> > + return -EINVAL;
> > + }
> > +
> > + *status = param[0].u.value.a;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(tee_bnxt_health_status);
> > +
> > +/**
> > + * tee_bnxt_handshake() - Get the handshake status
> > + * Uses an OP-TEE call to get handshake
> > + * status after bnxt device`s boot process.
> > + * @timeout: max timeout to wait for handshake
> > + * @status: status is populated
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int tee_bnxt_handshake(u32 timeout, u32 *status)
> > +{
> > + int ret = 0;
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + prepare_args(TA_CMD_BNXT_HANDSHAKE, &inv_arg, param);
> > +
> > + /* Fill additional invoke cmd params */
> > + param[0].u.value.a = timeout;
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev, "TA_CMD_BNXT_HANDSHAKE invoke err:
> > %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> > Please change print. There is no way of knowing if the return value on
> > error is from the ret or inv_arg.ret
Will update this
> >
> > + return -EINVAL;
> > + }
> > +
> > + *status = param[0].u.value.a;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(tee_bnxt_handshake);
> > +
> > +/**
> > + * tee_bnxt_copy_coredump() - Copy coredump from the allocated memory
> > + * Uses an OP-TEE call to copy coredump
> > + * @buf: desintation buffer where core dump is copied into
> > + * @offset: offset from the base address of core dump area
> > + * @size: size of the dump
> > + *
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size)
> > +{
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > + void *core_data;
> > + u32 rbytes = size;
> > + u32 nbytes = 0;
> > + int ret = 0;
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + if (!buf)
> > + return -EINVAL;
> > +
> > + prepare_args(TA_CMD_BNXT_COPY_COREDUMP, &inv_arg, param);
> > +
> > + while (rbytes) {
> > + nbytes = rbytes;
> > +
> > + nbytes = min_t(u32, rbytes, param[0].u.memref.size);
> > +
> > + /* Fill additional invoke cmd params */
> > + param[1].u.value.a = offset;
> > + param[1].u.value.b = nbytes;
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev,
> > + "TA_CMD_BNXT_COPY_COREDUMP invoke err: %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> Since you are simply doing the same thing over and over again looks like
> a "handle error"
> macro would be more appropriate such as:
> HANDLE_ERROR(ret, inv_arg.ret, TA_CMD)
ok. will add "HANDLE_ERROR" macro.
> > + return -EINVAL;
> > + }
> > +
> > + core_data = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
> > + if (IS_ERR(core_data)) {
> > + dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
> > + return PTR_ERR(core_data);
> > + }
> > +
> > + memcpy(buf, core_data, nbytes);
> > +
> > + rbytes -= nbytes;
> > + buf += nbytes;
> > + offset += nbytes;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(tee_bnxt_copy_coredump);
> > +
> > +/**
> > + * bnxt_fw_upgrade() - Upgrade the bnxt firmware and configuration of
> > + * bnxt device into the flash device.
> > + * Uses an OP-TEE call to upgrade firmware.
> > + * @buf: source buffer of firmware image
> > + * @size: size of the image
> > + *
> > + * Returns 0 on success, negative errno otherwise.
> > + */
> > +int bnxt_fw_upgrade(void *buf, u32 size)
> > +{
> > + struct tee_ioctl_invoke_arg inv_arg;
> > + struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
> > + void *fw_image_dst;
> > + int ret = 0;
> > +
> > + if (!pvt_data.ctx)
> > + return -ENODEV;
> > +
> > + /* we do not expect firmware size more than allocated tee shm size */
> > + if (!buf || size > MAX_SHM_MEM_SZ)
> > + return -EINVAL;
> > +
> > + prepare_args(TA_CMD_BNXT_FW_UPGRADE, &inv_arg, param);
> > +
> > + /* Fill additional invoke cmd params */
> > + param[1].u.value.a = size;
> > +
> > + fw_image_dst = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
> > + if (IS_ERR(fw_image_dst)) {
> > + dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
> > + return PTR_ERR(fw_image_dst);
> > + }
> > +
> > + memcpy(fw_image_dst, buf, size);
> > +
> > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
> > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > + dev_err(pvt_data.dev, "TA_CMD_BNXT_FW_UPGRADE invoke err:
> > %x\n",
> > + (ret < 0) ? ret : inv_arg.ret);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(bnxt_fw_upgrade);
> > +
> > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void
> > *data)
> > +{
> > + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> > + return 1;
> > + else
> > + return 0;
> > +}
> > +
> > +static int tee_bnxt_fw_probe(struct device *dev)
> > +{
> > + struct tee_client_device *bnxt_device = to_tee_client_device(dev);
> > + int ret, err = -ENODEV;
> > + struct tee_ioctl_open_session_arg sess_arg;
> > + struct tee_shm *fw_shm_pool;
> > +
> > + memset(&sess_arg, 0, sizeof(sess_arg));
> > +
> > + /* Open context with TEE driver */
> > + pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
> > + NULL);
> > + if (IS_ERR(pvt_data.ctx))
> > + return -ENODEV;
> > +
> > + /* Open session with Bnxt load Trusted App */
> > + memcpy(sess_arg.uuid, bnxt_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
> > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> > + sess_arg.num_params = 0;
> > +
> > + ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
> > + if ((ret < 0) || (sess_arg.ret != 0)) {
> > + dev_err(dev, "tee_client_open_session failed, err: %x\n",
> > + sess_arg.ret);
> > + err = -EINVAL;
> > + goto out_ctx;
> > + }
> > + pvt_data.session_id = sess_arg.session;
> > +
> > + pvt_data.dev = dev;
> > +
> > + fw_shm_pool = tee_shm_alloc(pvt_data.ctx, MAX_SHM_MEM_SZ,
> > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> > + if (IS_ERR(fw_shm_pool)) {
> > + tee_client_close_context(pvt_data.ctx);
> > + dev_err(pvt_data.dev, "tee_shm_alloc failed\n");
> > + err = PTR_ERR(fw_shm_pool);
> > + goto out_sess;
> > + }
> > +
> > + pvt_data.fw_shm_pool = fw_shm_pool;
> > +
> > + return 0;
> > +
> > +out_sess:
> > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> > +out_ctx:
> > + tee_client_close_context(pvt_data.ctx);
> > +
> > + return err;
> > +}
> > +
> > +static int tee_bnxt_fw_remove(struct device *dev)
> > +{
> > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
> > + tee_client_close_context(pvt_data.ctx);
> > + pvt_data.ctx = NULL;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct tee_client_device_id tee_bnxt_fw_id_table[] = {
> > + {UUID_INIT(0x6272636D, 0x2019, 0x0716,
> > + 0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)},
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(tee, tee_bnxt_fw_id_table);
> > +
> > +static struct tee_client_driver tee_bnxt_fw_driver = {
> > + .id_table = tee_bnxt_fw_id_table,
> > + .driver = {
> > + .name = DRIVER_NAME,
> > + .bus = &tee_bus_type,
> > + .probe = tee_bnxt_fw_probe,
> > + .remove = tee_bnxt_fw_remove,
> > + },
> > +};
> > +
> > +static int __init tee_bnxt_fw_mod_init(void)
> > +{
> > + return driver_register(&tee_bnxt_fw_driver.driver);
> > +}
> > +
> > +static void __exit tee_bnxt_fw_mod_exit(void)
> > +{
> > + driver_unregister(&tee_bnxt_fw_driver.driver);
> > +}
> > +
> > +module_init(tee_bnxt_fw_mod_init);
> > +module_exit(tee_bnxt_fw_mod_exit);
> > +
> > +MODULE_AUTHOR("Broadcom");
> > +MODULE_DESCRIPTION("Broadcom bnxt firmware manager");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/firmware/broadcom/tee_bnxt_fw.h
> > b/include/linux/firmware/broadcom/tee_bnxt_fw.h
> > new file mode 100644
> > index 00000000..d3b7206
> > --- /dev/null
> > +++ b/include/linux/firmware/broadcom/tee_bnxt_fw.h
> > @@ -0,0 +1,17 @@
> > +/* SPDX-License-Identifier: BSD-2-Clause */
> > +/*
> > + * Copyright 2019 Broadcom.
> > + */
> > +
> > +#ifndef _BROADCOM_TEE_BNXT_FW_H
> > +#define _BROADCOM_TEE_BNXT_FW_H
> > +
> > +#include <linux/types.h>
> > +
> > +int tee_bnxt_fw_load(void);
> > +int tee_bnxt_health_status(u32 *status);
> > +int tee_bnxt_handshake(u32 timeout, u32 *status);
> > +int tee_bnxt_fw_update(void *buf, u32 size);
> > +int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size);
> > +
> > +#endif /* _BROADCOM_TEE_BNXT_FW_H */
>
