[PATCH 2/2] gpio: pca953x.c: Use pca953x_read_regs instead of regmap_bulk_read

[David Jander]

The register number needs to be translated for chips with more than 8
ports. This patch fixes a bug causing all chips with more than 8 GPIO pins
to not work correctly.

Signed-off-by: David Jander <da...@protonic.nl>
---
 drivers/gpio/gpio-pca953x.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 30072a570bc2..48fea4c68e8d 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -606,8 +606,7 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
        u8 invert_irq_mask[MAX_BANK];
        u8 reg_direction[MAX_BANK];
 
-       regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
-                        NBANK(chip));
+       pca953x_read_regs(chip, chip->regs->direction, reg_direction);
 
        if (chip->driver_data & PCA_PCAL) {
                /* Enable latch on interrupt-enabled inputs */
@@ -710,8 +709,7 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, 
u8 *pending)
                return false;
 
        /* Remove output pins from the equation */
-       regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
-                        NBANK(chip));
+       pca953x_read_regs(chip, chip->regs->direction, reg_direction);
        for (i = 0; i < NBANK(chip); i++)
                cur_stat[i] &= reg_direction[i];
 
@@ -789,8 +787,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
         * interrupt.  We have to rely on the previous read for
         * this purpose.
         */
-       regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
-                        NBANK(chip));
+       pca953x_read_regs(chip, chip->regs->direction, reg_direction);
        for (i = 0; i < NBANK(chip); i++)
                chip->irq_stat[i] &= reg_direction[i];
        mutex_init(&chip->irq_lock);
-- 
2.19.1