On Thu 13 Jun 07:23 PDT 2019, Jeffrey Hugo wrote:
> The PM8005 is used on the msm8998 MTP. The S1 regulator is VDD_GFX, ie
> it needs to be on and controlled inorder to use the GPU. Add support to
> drive the PM8005 regulators so that we can bring up the GPU on msm8998.
>
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.h...@gmail.com>
> ---
> drivers/regulator/qcom_spmi-regulator.c | 169 ++++++++++++++++++++++++
> 1 file changed, 169 insertions(+)
>
> diff --git a/drivers/regulator/qcom_spmi-regulator.c
> b/drivers/regulator/qcom_spmi-regulator.c
> index 1c18fe5969b5..c7880c1d4bcd 100644
> --- a/drivers/regulator/qcom_spmi-regulator.c
> +++ b/drivers/regulator/qcom_spmi-regulator.c
> @@ -104,6 +104,7 @@ enum spmi_regulator_logical_type {
> SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
> SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
> SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
> + SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
> };
>
> enum spmi_regulator_type {
> @@ -150,6 +151,7 @@ enum spmi_regulator_subtype {
> SPMI_REGULATOR_SUBTYPE_5V_BOOST = 0x01,
> SPMI_REGULATOR_SUBTYPE_FTS_CTL = 0x08,
> SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL = 0x09,
> + SPMI_REGULATOR_SUBTYPE_FTS426_CTL = 0x0a,
> SPMI_REGULATOR_SUBTYPE_BB_2A = 0x01,
> SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1 = 0x0d,
> SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2 = 0x0e,
> @@ -170,6 +172,18 @@ enum spmi_common_regulator_registers {
> SPMI_COMMON_REG_STEP_CTRL = 0x61,
> };
>
> +/*
> + * Second common register layout used by newer devices starting with
> ftsmps426
> + * Note that some of the registers from the first common layout remain
> + * unchanged and their definition is not duplicated.
> + */
> +enum spmi_ftsmps426_regulator_registers {
> + SPMI_FTSMPS426_REG_VOLTAGE_LSB = 0x40,
> + SPMI_FTSMPS426_REG_VOLTAGE_MSB = 0x41,
> + SPMI_FTSMPS426_REG_VOLTAGE_ULS_LSB = 0x68,
> + SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB = 0x69,
> +};
> +
> enum spmi_vs_registers {
> SPMI_VS_REG_OCP = 0x4a,
> SPMI_VS_REG_SOFT_START = 0x4c,
> @@ -229,6 +243,14 @@ enum spmi_common_control_register_index {
> #define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK 0x01
> #define SPMI_COMMON_MODE_FOLLOW_ALL_MASK 0x1f
>
> +#define SPMI_FTSMPS426_MODE_BYPASS_MASK 3
> +#define SPMI_FTSMPS426_MODE_RETENTION_MASK 4
> +#define SPMI_FTSMPS426_MODE_LPM_MASK 5
> +#define SPMI_FTSMPS426_MODE_AUTO_MASK 6
> +#define SPMI_FTSMPS426_MODE_HPM_MASK 7
> +
> +#define SPMI_FTSMPS426_MODE_MASK 0x07
> +
> /* Common regulator pull down control register layout */
> #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK 0x80
>
> @@ -274,6 +296,23 @@ enum spmi_common_control_register_index {
> #define SPMI_FTSMPS_STEP_MARGIN_NUM 4
> #define SPMI_FTSMPS_STEP_MARGIN_DEN 5
>
> +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK 0x03
> +#define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT 0
> +
> +/* Clock rate in kHz of the FTSMPS426 regulator reference clock. */
> +#define SPMI_FTSMPS426_CLOCK_RATE 4800
> +
> +/* Minimum voltage stepper delay for each step. */
> +#define SPMI_FTSMPS426_STEP_DELAY 2
> +
> +/*
> + * The ratio SPMI_FTSMPS426_STEP_MARGIN_NUM/SPMI_FTSMPS426_STEP_MARGIN_DEN is
> + * used to adjust the step rate in order to account for oscillator variance.
> + */
> +#define SPMI_FTSMPS426_STEP_MARGIN_NUM 10
> +#define SPMI_FTSMPS426_STEP_MARGIN_DEN 11
> +
> +
> /* VSET value to decide the range of ULT SMPS */
> #define ULT_SMPS_RANGE_SPLIT 0x60
>
> @@ -447,6 +486,10 @@ static struct spmi_voltage_range ftsmps2p5_ranges[] = {
> SPMI_VOLTAGE_RANGE(1, 160000, 1360000, 2200000, 2200000, 10000),
> };
>
> +static struct spmi_voltage_range ftsmps426_ranges[] = {
> + SPMI_VOLTAGE_RANGE(0, 0, 320000, 1352000, 1352000, 4000),
> +};
> +
> static struct spmi_voltage_range boost_ranges[] = {
> SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
> };
> @@ -480,6 +523,7 @@ static DEFINE_SPMI_SET_POINTS(ln_ldo);
> static DEFINE_SPMI_SET_POINTS(smps);
> static DEFINE_SPMI_SET_POINTS(ftsmps);
> static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
> +static DEFINE_SPMI_SET_POINTS(ftsmps426);
> static DEFINE_SPMI_SET_POINTS(boost);
> static DEFINE_SPMI_SET_POINTS(boost_byp);
> static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
> @@ -747,6 +791,23 @@ spmi_regulator_common_set_voltage(struct regulator_dev
> *rdev, unsigned selector)
> return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
> }
>
> +static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
> + unsigned selector);
> +
> +static int spmi_regulator_ftsmps426_set_voltage(struct regulator_dev *rdev,
> + unsigned selector)
> +{
> + struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> + u8 buf[2];
> + int mV;
> +
> + mV = spmi_regulator_common_list_voltage(rdev, selector) / 1000;
> +
> + buf[0] = mV & 0xff;
> + buf[1] = mV >> 8;
> + return spmi_vreg_write(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2);
> +}
> +
> static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
> unsigned int old_selector, unsigned int new_selector)
> {
> @@ -778,6 +839,16 @@ static int spmi_regulator_common_get_voltage(struct
> regulator_dev *rdev)
> return spmi_hw_selector_to_sw(vreg, voltage_sel, range);
> }
>
> +static int spmi_regulator_ftsmps426_get_voltage(struct regulator_dev *rdev)
> +{
> + struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> + u8 buf[2];
> +
> + spmi_vreg_read(vreg, SPMI_FTSMPS426_REG_VOLTAGE_LSB, buf, 2);
> +
> + return (((unsigned int)buf[1] << 8) | (unsigned int)buf[0]) * 1000;
> +}
> +
> static int spmi_regulator_single_map_voltage(struct regulator_dev *rdev,
> int min_uV, int max_uV)
> {
> @@ -921,6 +992,23 @@ static unsigned int
> spmi_regulator_common_get_mode(struct regulator_dev *rdev)
> }
> }
>
> +static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev
> *rdev)
> +{
> + struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> + u8 reg;
> +
> + spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1);
> +
> + switch (reg) {
> + case SPMI_FTSMPS426_MODE_HPM_MASK:
> + return REGULATOR_MODE_NORMAL;
> + case SPMI_FTSMPS426_MODE_AUTO_MASK:
> + return REGULATOR_MODE_FAST;
> + default:
> + return REGULATOR_MODE_IDLE;
> + }
> +}
> +
> static int
> spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
> {
> @@ -943,6 +1031,28 @@ spmi_regulator_common_set_mode(struct regulator_dev
> *rdev, unsigned int mode)
> return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
> }
>
> +static int
> +spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int
> mode)
> +{
> + struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> + u8 mask = SPMI_FTSMPS426_MODE_MASK;
> + u8 val;
> +
> + switch (mode) {
> + case REGULATOR_MODE_NORMAL:
> + val = SPMI_FTSMPS426_MODE_HPM_MASK;
> + break;
> + case REGULATOR_MODE_FAST:
> + val = SPMI_FTSMPS426_MODE_AUTO_MASK;
> + break;
> + default:
> + val = SPMI_FTSMPS426_MODE_LPM_MASK;
> + break;
> + }
> +
> + return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
> +}
> +
> static int
> spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
> {
> @@ -1272,6 +1382,21 @@ static struct regulator_ops spmi_ult_ldo_ops = {
> .set_soft_start = spmi_regulator_common_set_soft_start,
> };
>
> +static struct regulator_ops spmi_ftsmps426_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .set_voltage_sel = spmi_regulator_ftsmps426_set_voltage,
> + .set_voltage_time_sel = spmi_regulator_set_voltage_time_sel,
> + .get_voltage = spmi_regulator_ftsmps426_get_voltage,
> + .map_voltage = spmi_regulator_single_map_voltage,
> + .list_voltage = spmi_regulator_common_list_voltage,
> + .set_mode = spmi_regulator_ftsmps426_set_mode,
> + .get_mode = spmi_regulator_ftsmps426_get_mode,
> + .set_load = spmi_regulator_common_set_load,
> + .set_pull_down = spmi_regulator_common_set_pull_down,
> +};
> +
> /* Maximum possible digital major revision value */
> #define INF 0xFF
>
> @@ -1307,6 +1432,7 @@ static const struct spmi_regulator_mapping
> supported_regulators[] = {
> SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST, boost, boost, 0),
> SPMI_VREG(FTS, FTS_CTL, 0, INF, FTSMPS, ftsmps, ftsmps, 100000),
> SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
> + SPMI_VREG(FTS, FTS426_CTL, 0, INF, FTSMPS426, ftsmps426, ftsmps426,
> 100000),
> SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
> SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
> ult_lo_smps, 100000),
> @@ -1444,6 +1570,34 @@ static int spmi_regulator_init_slew_rate(struct
> spmi_regulator *vreg)
> return ret;
> }
>
> +static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator
> *vreg)
> +{
> + int ret;
> + u8 reg = 0;
> + int delay, slew_rate;
> + const struct spmi_voltage_range *range = &vreg->set_points->range[0];
> +
> + ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, ®, 1);
> + if (ret) {
> + dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
> + return ret;
> + }
> +
> + delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK;
> + delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT;
> +
> + /* slew_rate has units of uV/us */
> + slew_rate = SPMI_FTSMPS426_CLOCK_RATE * range->step_uV;
> + slew_rate /= 1000 * (SPMI_FTSMPS426_STEP_DELAY << delay);
> + slew_rate *= SPMI_FTSMPS426_STEP_MARGIN_NUM;
> + slew_rate /= SPMI_FTSMPS426_STEP_MARGIN_DEN;
> +
> + /* Ensure that the slew rate is greater than 0 */
> + vreg->slew_rate = max(slew_rate, 1);
> +
> + return ret;
> +}
> +
> static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
> const struct spmi_regulator_init_data *data)
> {
> @@ -1583,6 +1737,12 @@ static int spmi_regulator_of_parse(struct device_node
> *node,
> ret = spmi_regulator_init_slew_rate(vreg);
> if (ret)
> return ret;
> + break;
> + case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426:
> + ret = spmi_regulator_init_slew_rate_ftsmps426(vreg);
> + if (ret)
> + return ret;
> + break;
> default:
> break;
> }
> @@ -1739,7 +1899,16 @@ static const struct spmi_regulator_data
> pmi8994_regulators[] = {
> { }
> };
>
> +static const struct spmi_regulator_data pm8005_regulators[] = {
> + { "s1", 0x1400, "vdd_s1", },
> + { "s2", 0x1700, "vdd_s2", },
> + { "s3", 0x1a00, "vdd_s3", },
> + { "s4", 0x1d00, "vdd_s4", },
> + { }
> +};
> +
> static const struct of_device_id qcom_spmi_regulator_match[] = {
> + { .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators },
> { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
> { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
> { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
> --
> 2.17.1
>
