Hi, On 2019/2/19 10:50, Chunfeng Yun wrote: >> + if (ret) >> + hisi_hikey_usb->typec_vbus_enable_val = 1; >> + >> + hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus", >> + hisi_hikey_usb->typec_vbus_enable_val ? >> + GPIOD_OUT_LOW : GPIOD_OUT_HIGH); >> + if (!hisi_hikey_usb->typec_vbus) >> + return -ENOENT; >> + else if (IS_ERR(hisi_hikey_usb->typec_vbus)) >> + return PTR_ERR(hisi_hikey_usb->typec_vbus); >> + >> + gpiod_direction_output(hisi_hikey_usb->typec_vbus, >> + !hisi_hikey_usb->typec_vbus_enable_val); > maybe a simple way if use fixed regulator? > The hardware of the Hikey960 board has been fixed, and the type-c port can act as UFP. So it is better to close the vbus when Hikey960 connect to host(e.g PC). >> + >> + hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch", >> GPIOD_IN); >> + if (!hisi_hikey_usb->otg_switch) >> + return -ENOENT; >> + else if (IS_ERR(hisi_hikey_usb->otg_switch)) >> + return PTR_ERR(hisi_hikey_usb->otg_switch); >> + >> + gpiod_direction_output(hisi_hikey_usb->otg_switch, USB_SWITCH_TO_HUB); >> + >> + /* hub-vdd33-en is optional */ >> + hisi_hikey_usb->hub_vbus = devm_gpiod_get(dev, "hub-vdd33-en", >> + GPIOD_OUT_LOW); >> + if (IS_ERR(hisi_hikey_usb->hub_vbus)) >> + return PTR_ERR(hisi_hikey_usb->hub_vbus); >> + >> + gpiod_direction_output(hisi_hikey_usb->hub_vbus, HUB_VBUS_POWER_ON); > ditto >> + >> + hisi_hikey_usb->role_sw = usb_role_switch_get(dev); >> + if (!hisi_hikey_usb->role_sw) >> + return -EPROBE_DEFER; >> + else if (IS_ERR(hisi_hikey_usb->role_sw)) >> + return PTR_ERR(hisi_hikey_usb->role_sw); >> +
Thanks Yu Chen
