On 2019-02-11 17:05, Federico Vaga wrote:
> Miscellaneous style fixes from checkpatch
> 
> Signed-off-by: Federico Vaga <federico.v...@cern.ch>
> ---
>  drivers/i2c/busses/i2c-ocores.c | 30 +++++++++++++++++++-----------
>  1 file changed, 19 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index 78085a8..54b2156 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -179,8 +179,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8 
> stat)
>                       oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
>                       goto out;
>               }
> -     } else
> +     } else {
>               msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
> +     }
>  
>       /* end of msg? */
>       if (i2c->pos == msg->len) {
> @@ -197,11 +198,11 @@ static void ocores_process(struct ocores_i2c *i2c, u8 
> stat)
>                               i2c->state = STATE_START;
>  
>                               oc_setreg(i2c, OCI2C_DATA, addr);
> -                             oc_setreg(i2c, OCI2C_CMD,  OCI2C_CMD_START);
> +                             oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
>                               goto out;
> -                     } else
> -                             i2c->state = (msg->flags & I2C_M_RD)
> -                                     ? STATE_READ : STATE_WRITE;
> +                     }
> +                     i2c->state = (msg->flags & I2C_M_RD)
> +                             ? STATE_READ : STATE_WRITE;
>               } else {
>                       i2c->state = STATE_DONE;
>                       oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
> @@ -461,13 +462,16 @@ static const struct of_device_id ocores_i2c_match[] = {
>  MODULE_DEVICE_TABLE(of, ocores_i2c_match);
>  
>  #ifdef CONFIG_OF
> -/* Read and write functions for the GRLIB port of the controller. Registers 
> are
> +/*
> + * Read and write functions for the GRLIB port of the controller. Registers 
> are
>   * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
> - * register. The subsequent registers has their offset decreased 
> accordingly. */
> + * register. The subsequent registers have their offsets decreased 
> accordingly.
> + */
>  static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
>  {
>       u32 rd;
>       int rreg = reg;
> +
>       if (reg != OCI2C_PRELOW)
>               rreg--;
>       rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
> @@ -481,6 +485,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c, int 
> reg, u8 value)
>  {
>       u32 curr, wr;
>       int rreg = reg;
> +
>       if (reg != OCI2C_PRELOW)
>               rreg--;
>       if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
> @@ -569,7 +574,7 @@ static int ocores_i2c_of_probe(struct platform_device 
> *pdev,
>       return 0;
>  }
>  #else
> -#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
> +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV
>  #endif
>  
>  static int ocores_i2c_probe(struct platform_device *pdev)
> @@ -686,10 +691,11 @@ err_clk:
>  static int ocores_i2c_remove(struct platform_device *pdev)
>  {
>       struct ocores_i2c *i2c = platform_get_drvdata(pdev);
> +     u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
>  
>       /* disable i2c logic */
> -     oc_setreg(i2c, OCI2C_CONTROL, oc_getreg(i2c, OCI2C_CONTROL)
> -               & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> +     ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> +     oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>  
>       /* remove adapter & data */
>       i2c_del_adapter(&i2c->adap);
> @@ -707,7 +713,9 @@ static int ocores_i2c_suspend(struct device *dev)
>       u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
>  
>       /* make sure the device is disabled */
> -     oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
> +     ctrl = oc_getreg(i2c, OCI2C_CONTROL);

There's a pointless double oc_getreg(i2c, OCI2C_CONTROL).

Cheers,
Peter

> +     ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> +     oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>  
>       if (!IS_ERR(i2c->clk))
>               clk_disable_unprepare(i2c->clk);
> 

Reply via email to