Add device tree support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tdusz...@gmail.com>
---
.../iio/chemical/plantower,pms7003.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644
Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
diff --git
a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..e4c7f2fb1e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,19 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+
+Optional properties:
+- vcc-supply: phandle to the regulator that provides power to the sensor
+- set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+ pms7003 {
+ compatible = "plantower,pms7003";
+ };
+};
--
2.20.1
