Hi Sugaya-san
On Mon, Nov 19, 2018 at 10:01 AM Sugaya Taichi
<sugaya.tai...@socionext.com> wrote:
>
> Add Milbeaut M10V pinctrl.
> The M10V has the pins that can be used GPIOs or take multiple other
> functions.
>
> Signed-off-by: Sugaya Taichi <sugaya.tai...@socionext.com>
This patch was sent to:
linux-...@vger.kernel.org,
devicet...@vger.kernel.org,
linux-arm-ker...@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-ser...@vger.kernel.org
Unfortunately, the most important ML
linux-g...@vger.kernel.org
was not addressed.
The pinctrl maintainer may not notice this patch.
> diff --git a/drivers/pinctrl/pinctrl-m10v.c b/drivers/pinctrl/pinctrl-m10v.c
> new file mode 100644
> index 0000000..d4ca713
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-m10v.c
> @@ -0,0 +1,765 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Socionext Ltd.
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Jassi Brar <jaswinder.si...@linaro.org>
My company name is "Socionext Inc." instead of "Socionext Ltd."
> +static struct platform_driver m10v_pinctrl_driver = {
> + .probe = m10v_pinctrl_probe,
> + .driver = {
> + .name = "m10v-pinctrl",
> + .of_match_table = m10v_pmatch,
> + },
> +};
> +
> +static int __init m10v_pinctrl_init(void)
> +{
> + return platform_driver_register(&m10v_pinctrl_driver);
> +}
> +arch_initcall(m10v_pinctrl_init);
Can't it be builtin_platform_driver()?
Which device requires this to be arch_initcall()?
--
Best Regards
Masahiro Yamada
