This adds device tree binding documentation for the Moxtet bus, a bus
via which the different modules connected to the Turris Mox router can
be configured.
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Cc: Rob Herring <robh...@kernel.org>
Cc: devicet...@vger.kernel.org
---
.../devicetree/bindings/bus/moxtet.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/moxtet.txt
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt
b/Documentation/devicetree/bindings/bus/moxtet.txt
new file mode 100644
index 000000000000..19a1bab61e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/moxtet.txt
@@ -0,0 +1,34 @@
+Turris Mox module configuration bus (over SPI)
+
+Required properties:
+ - compatible : Should be "cznic,moxtet".
+ - #address-cells : Has to be 1
+ - #size-cells : Has to be 0
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Required properties of subnodes:
+ - reg : Should be position on the Moxtet bus
+
+The driver finds the devices connected to the bus by itself, but it may be
+needed to reference some of them from other parts of the device tree. In that
+case the devices can be defined as subnodes of the moxtet node.
+
+Example:
+
+ moxtet@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cznic,moxtet";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ spi-cpol;
+ spi-cpha;
+
+ moxtet_sfp: moxtet-sfp@0 {
+ compatible = "cznic,moxtet-sfp";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ }
+ };
--
2.18.1
