On 22.10.2018 11:52, Christoph Hellwig wrote: > This driver has never been wired up due to the life of the Linux > git tree, and has severely bitrotted. > > Signed-off-by: Christoph Hellwig <h...@lst.de>
Thanks Christoph! I've already queued it up in the parisc for-next git tree: https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/log/?h=for-next Helge > --- > drivers/parisc/Makefile | 3 - > drivers/parisc/ccio-rm-dma.c | 202 ----------------------------------- > 2 files changed, 205 deletions(-) > delete mode 100644 drivers/parisc/ccio-rm-dma.c > > diff --git a/drivers/parisc/Makefile b/drivers/parisc/Makefile > index 3cd5e6cb8478..99fa6a89e0b9 100644 > --- a/drivers/parisc/Makefile > +++ b/drivers/parisc/Makefile > @@ -8,9 +8,6 @@ > obj-$(CONFIG_IOSAPIC) += iosapic.o > obj-$(CONFIG_IOMMU_SBA) += sba_iommu.o > obj-$(CONFIG_PCI_LBA) += lba_pci.o > - > -# Only use one of them: ccio-rm-dma is for PCX-W systems *only* > -# obj-$(CONFIG_IOMMU_CCIO) += ccio-rm-dma.o > obj-$(CONFIG_IOMMU_CCIO) += ccio-dma.o > > obj-$(CONFIG_GSC) += gsc.o > diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c > deleted file mode 100644 > index df7932af48b7..000000000000 > --- a/drivers/parisc/ccio-rm-dma.c > +++ /dev/null > @@ -1,202 +0,0 @@ > -/* > - * ccio-rm-dma.c: > - * DMA management routines for first generation cache-coherent machines. > - * "Real Mode" operation refers to U2/Uturn chip operation. The chip > - * can perform coherency checks w/o using the I/O MMU. That's all we > - * need until support for more than 4GB phys mem is needed. > - * > - * This is the trivial case - basically what x86 does. > - * > - * Drawbacks of using Real Mode are: > - * o outbound DMA is slower since one isn't using the prefetching > - * U2 can do for outbound DMA. > - * o Ability to do scatter/gather in HW is also lost. > - * o only known to work with PCX-W processor. (eg C360) > - * (PCX-U/U+ are not coherent with U2 in real mode.) > - * > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License as published by > - * the Free Software Foundation; either version 2 of the License, or > - * (at your option) any later version. > - * > - * > - * Original version/author: > - * CVSROOT=:pserver:anonymous@198.186.203.37:/cvsroot/linux-parisc > - * cvs -z3 co linux/arch/parisc/kernel/dma-rm.c > - * > - * (C) Copyright 2000 Philipp Rumpf <pru...@tux.org> > - * > - * > - * Adopted for The Puffin Group's parisc-linux port by Grant Grundler. > - * (C) Copyright 2000 Grant Grundler <grund...@puffin.external.hp.com> > - * > - */ > - > -#include <linux/types.h> > -#include <linux/init.h> > -#include <linux/mm.h> > -#include <linux/string.h> > -#include <linux/pci.h> > -#include <linux/gfp.h> > - > -#include <linux/uaccess.h> > - > -#include <asm/io.h> > -#include <asm/hardware.h> > -#include <asm/page.h> > - > -/* Only chose "ccio" since that's what HP-UX calls it.... > -** Make it easier for folks to migrate from one to the other :^) > -*/ > -#define MODULE_NAME "ccio" > - > -#define U2_IOA_RUNWAY 0x580 > -#define U2_BC_GSC 0x501 > -#define UTURN_IOA_RUNWAY 0x581 > -#define UTURN_BC_GSC 0x502 > - > -#define IS_U2(id) ( \ > - (((id)->hw_type == HPHW_IOA) && ((id)->hversion == U2_IOA_RUNWAY)) || \ > - (((id)->hw_type == HPHW_BCPORT) && ((id)->hversion == U2_BC_GSC)) \ > -) > - > -#define IS_UTURN(id) ( \ > - (((id)->hw_type == HPHW_IOA) && ((id)->hversion == UTURN_IOA_RUNWAY)) || > \ > - (((id)->hw_type == HPHW_BCPORT) && ((id)->hversion == UTURN_BC_GSC)) \ > -) > - > -static int ccio_dma_supported( struct pci_dev *dev, u64 mask) > -{ > - if (dev == NULL) { > - printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); > - BUG(); > - return(0); > - } > - > - /* only support 32-bit devices (ie PCI/GSC) */ > - return((int) (mask >= 0xffffffffUL)); > -} > - > - > -static void *ccio_alloc_consistent(struct pci_dev *dev, size_t size, > - dma_addr_t *handle) > -{ > - void *ret; > - > - ret = (void *)__get_free_pages(GFP_ATOMIC, get_order(size)); > - > - if (ret != NULL) { > - memset(ret, 0, size); > - *handle = virt_to_phys(ret); > - } > - return ret; > -} > - > -static void ccio_free_consistent(struct pci_dev *dev, size_t size, > - void *vaddr, dma_addr_t handle) > -{ > - free_pages((unsigned long)vaddr, get_order(size)); > -} > - > -static dma_addr_t ccio_map_single(struct pci_dev *dev, void *ptr, size_t > size, > - int direction) > -{ > - return virt_to_phys(ptr); > -} > - > -static void ccio_unmap_single(struct pci_dev *dev, dma_addr_t dma_addr, > - size_t size, int direction) > -{ > - /* Nothing to do */ > -} > - > - > -static int ccio_map_sg(struct pci_dev *dev, struct scatterlist *sglist, int > nents, int direction) > -{ > - int tmp = nents; > - > - /* KISS: map each buffer separately. */ > - while (nents) { > - sg_dma_address(sglist) = ccio_map_single(dev, sglist->address, > sglist->length, direction); > - sg_dma_len(sglist) = sglist->length; > - nents--; > - sglist++; > - } > - > - return tmp; > -} > - > - > -static void ccio_unmap_sg(struct pci_dev *dev, struct scatterlist *sglist, > int nents, int direction) > -{ > -#if 0 > - while (nents) { > - ccio_unmap_single(dev, sg_dma_address(sglist), > sg_dma_len(sglist), direction); > - nents--; > - sglist++; > - } > - return; > -#else > - /* Do nothing (copied from current ccio_unmap_single() :^) */ > -#endif > -} > - > - > -static struct pci_dma_ops ccio_ops = { > - ccio_dma_supported, > - ccio_alloc_consistent, > - ccio_free_consistent, > - ccio_map_single, > - ccio_unmap_single, > - ccio_map_sg, > - ccio_unmap_sg, > - NULL, /* dma_sync_single_for_cpu : NOP for U2 */ > - NULL, /* dma_sync_single_for_device : NOP for U2 */ > - NULL, /* dma_sync_sg_for_cpu : ditto */ > - NULL, /* dma_sync_sg_for_device : ditto */ > -}; > - > - > -/* > -** Determine if u2 should claim this chip (return 0) or not (return 1). > -** If so, initialize the chip and tell other partners in crime they > -** have work to do. > -*/ > -static int __init > -ccio_probe(struct parisc_device *dev) > -{ > - printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, > - dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", > - dev->hpa.start); > - > -/* > -** FIXME - should check U2 registers to verify it's really running > -** in "Real Mode". > -*/ > - > -#if 0 > -/* will need this for "Virtual Mode" operation */ > - ccio_hw_init(ccio_dev); > - ccio_common_init(ccio_dev); > -#endif > - hppa_dma_ops = &ccio_ops; > - return 0; > -} > - > -static const struct parisc_device_id ccio_tbl[] __initconst = { > - { HPHW_BCPORT, HVERSION_REV_ANY_ID, U2_BC_GSC, 0xc }, > - { HPHW_BCPORT, HVERSION_REV_ANY_ID, UTURN_BC_GSC, 0xc }, > - { 0, } > -}; > - > -static struct parisc_driver ccio_driver __refdata = { > - .name = "U2/Uturn", > - .id_table = ccio_tbl, > - .probe = ccio_probe, > -}; > - > -void __init ccio_init(void) > -{ > - register_parisc_driver(&ccio_driver); > -} >
