From: Shubhrajyoti Datta <[email protected]> Currently the clocks are not enabled at probe but when the port is used. Remove the unconditional disable at remove.
Fixes the below [ 77.660196] ------------[ cut here ]------------ [ 77.664749] WARNING: CPU: 0 PID: 1992 at drivers/clk/clk.c:622 clk_core_disable+0x78/0x80 [ 77.672892] Modules linked in: [ 77.675930] CPU: 0 PID: 1992 Comm: sh Not tainted 4.14.0 #23 [ 77.681570] Hardware name: xlnx,zynqmp (DT) [ 77.685736] task: ffffffc879e2e580 task.stack: ffffff800be30000 [ 77.691641] PC is at clk_core_disable+0x78/0x80 Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- drivers/tty/serial/uartlite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 58296eb..4a7989d 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -857,7 +857,7 @@ static int ulite_remove(struct platform_device *pdev) struct uartlite_data *pdata = port->private_data; int rc; - clk_disable_unprepare(pdata->clk); + clk_unprepare(pdata->clk); rc = ulite_release(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); -- 2.1.1
