Hi Pascal,
On Mon, Oct 08, 2018 at 04:29:41PM +0000, Pascal PAILLET-LME wrote:
> From: pascal paillet <p.pail...@st.com>
>
> The stpmic1 pmic is able to manage an onkey button. This driver exposes
> the stpmic1 onkey as an input device. It can also be configured to
> shut-down the power supplies on a long key-press with an adjustable
> duration.
>
> Signed-off-by: pascal paillet <p.pail...@st.com>
> ---
> changes in v3:
> * Rename struct stpmic1_dev by struct stpmic1.
> * Replace of_property_ by device_property.
> * Remove log in IRQ handler.
> * Add email address in MODULE_AUTHOR.
>
> drivers/input/misc/Kconfig | 11 ++
> drivers/input/misc/Makefile | 2 +
> drivers/input/misc/stpmic1_onkey.c | 248
> +++++++++++++++++++++++++++++++++++++
> 3 files changed, 261 insertions(+)
> create mode 100644 drivers/input/misc/stpmic1_onkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index ca59a2b..279fb02 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
> To compile this driver as a module, choose M here. The module will
> be called sc27xx_vibra.
>
> +config INPUT_STPMIC1_ONKEY
> + tristate "STPMIC1 PMIC Onkey support"
> + depends on MFD_STPMIC1
> + help
> + Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
> + can be used to wakeup from low power modes and force a shut-down on
> + long press.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called stpmic1_onkey.
> +
> endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 9d0f9d1..1b44202 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> +obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
> obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
> obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
> obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
> @@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
> obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
> obj-$(CONFIG_INPUT_YEALINK) += yealink.o
> obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
> +
> diff --git a/drivers/input/misc/stpmic1_onkey.c
> b/drivers/input/misc/stpmic1_onkey.c
> new file mode 100644
> index 0000000..871a087
> --- /dev/null
> +++ b/drivers/input/misc/stpmic1_onkey.c
> @@ -0,0 +1,248 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) STMicroelectronics 2018
> +// Author: Pascal Paillet <p.pail...@st.com> for STMicroelectronics.
> +
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/stpmic1.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +/**
> + * struct stpmic1_onkey - OnKey data
> + * @pmic: pointer to STPMIC1 PMIC device
> + * @input_dev: pointer to input device
> + * @irq_falling: irq that we are hooked on to
> + * @irq_rising: irq that we are hooked on to
> + */
> +struct stpmic1_onkey {
> + struct stpmic1 *pmic;
> + struct input_dev *input_dev;
> + int irq_falling;
> + int irq_rising;
> +};
> +
> +/**
> + * struct pmic_onkey_config - configuration of pmic PONKEYn
> + * @cc_flag_clear: value to clear CC flag in case of PowerOff
> + * trigger by longkey press
> + * @onkey_pullup_val: value of PONKEY PullUp (active or
> inactive)
> + * @power_off_time_sec: value for long press h/w shutdown event
> + */
> +struct pmic_onkey_config {
> + bool cc_flag_clear;
> + u8 onkey_pullup_val;
> + u8 power_off_time_sec;
> +};
> +
> +static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
> +{
> + struct stpmic1_onkey *onkey = ponkey;
> + struct input_dev *input_dev = onkey->input_dev;
> +
> + input_report_key(input_dev, KEY_POWER, 1);
> + pm_wakeup_event(input_dev->dev.parent, 0);
> + input_sync(input_dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
> +{
> + struct stpmic1_onkey *onkey = ponkey;
> + struct input_dev *input_dev = onkey->input_dev;
> +
> + input_report_key(input_dev, KEY_POWER, 0);
> + pm_wakeup_event(input_dev->dev.parent, 0);
> + input_sync(input_dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int stpmic1_onkey_dt_params(struct platform_device *pdev,
> + struct stpmic1_onkey *onkey,
> + struct pmic_onkey_config *config)
> +{
> + struct device *dev = &pdev->dev;
> + u32 val;
> +
> + onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
> + if (onkey->irq_falling < 0) {
> + dev_err(dev, "failed: request IRQ onkey-falling %d\n",
> + onkey->irq_falling);
> + return onkey->irq_falling;
> + }
> +
> + onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
> + if (onkey->irq_rising < 0) {
> + dev_err(dev, "failed: request IRQ onkey-rising %d\n",
> + onkey->irq_rising);
> + return onkey->irq_rising;
> + }
> +
> + if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
> + if ((val > 0) && (val <= 16)) {
> + config->power_off_time_sec = val;
> + } else {
> + dev_err(dev, "power-off-time-sec out of range\n");
> + return -EINVAL;
> + }
> + }
> +
> + if (device_property_present(dev, "st,onkey-clear-cc-flag"))
> + config->cc_flag_clear = true;
> +
> + if (device_property_present(dev, "st,onkey-pu-inactive"))
> + config->onkey_pullup_val = PONKEY_PU_ACTIVE;
> +
> + dev_dbg(dev, "onkey-switch-off duration=%d seconds\n",
> + config->power_off_time_sec);
> +
> + return 0;
> +}
> +
> +static int stpmic1_onkey_probe(struct platform_device *pdev)
> +{
> + struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
> + struct device *dev = &pdev->dev;
> + struct input_dev *input_dev;
> + struct stpmic1_onkey *onkey;
> + struct pmic_onkey_config config;
> + unsigned int val = 0;
> + int error;
> +
> + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
> + if (!onkey)
> + return -ENOMEM;
> +
> + memset(&config, 0, sizeof(struct pmic_onkey_config));
> + error = stpmic1_onkey_dt_params(pdev, onkey, &config);
> + if (error)
> + return error;
> +
> + input_dev = devm_input_allocate_device(dev);
> + if (!input_dev) {
> + dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
> + return -ENOMEM;
> + }
> +
> + input_dev->name = "pmic_onkey";
> + input_dev->phys = "pmic_onkey/input0";
> +
> + input_set_capability(input_dev, EV_KEY, KEY_POWER);
> +
> + /* Setup Power Onkey Hardware parameters (long key press)*/
> + if (config.power_off_time_sec > 0) {
> + val |= PONKEY_PWR_OFF;
> + val |= ((16 - config.power_off_time_sec) &
> + PONKEY_TURNOFF_TIMER_MASK);
> + }
> + if (config.cc_flag_clear)
How about doing:
if (device_property_present(dev, "st,onkey-clear-cc-flag"))
> + val |= PONKEY_CC_FLAG_CLEAR;
and similarly handle other properties? Then you would not really need
the "config" structure/variable nor stpmic1_onkey_dt_params() and I do
not think you'd lose any readability.
> + error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
> + PONKEY_TURNOFF_MASK, val);
> + if (error) {
> + dev_err(dev, "LONG_PRESS_KEY_UPDATE failed: %d\n", error);
> + return error;
> + }
> +
> + error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
> + PONKEY_PU_ACTIVE,
> + config.onkey_pullup_val);
> + if (error) {
> + dev_err(dev, "ONKEY Pads configuration failed: %d\n", error);
> + return error;
> + }
> +
> + onkey->pmic = pmic;
> + onkey->input_dev = input_dev;
> +
> + /* interrupt is nested in a thread */
> + error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
> + onkey_falling_irq, IRQF_ONESHOT,
> + dev_name(dev), onkey);
> + if (error) {
> + dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
> + return error;
> + }
> +
> + error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
> + onkey_rising_irq, IRQF_ONESHOT,
> + dev_name(dev), onkey);
> + if (error) {
> + dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
> + return error;
> + }
> +
> + error = input_register_device(input_dev);
> + if (error) {
> + dev_err(dev, "Can't register power button: %d\n", error);
> + return error;
> + }
> +
> + platform_set_drvdata(pdev, onkey);
> + device_init_wakeup(dev, true);
> +
> + return 0;
> +}
> +
> +static int stpmic1_onkey_remove(struct platform_device *pdev)
> +{
> + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> + input_unregister_device(onkey->input_dev);
Input device is devm-managed, it doe snot have to be unregistered
manually. You can remove stpmic1_onkey_remove altogether.
> + return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev)) {
> + enable_irq_wake(onkey->irq_falling);
> + enable_irq_wake(onkey->irq_rising);
> + }
> + return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev)) {
> + disable_irq_wake(onkey->irq_falling);
> + disable_irq_wake(onkey->irq_rising);
> + }
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
> + stpmic1_onkey_suspend,
> + stpmic1_onkey_resume);
> +
> +static const struct of_device_id of_stpmic1_onkey_match[] = {
> + { .compatible = "st,stpmic1-onkey" },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
> +
> +static struct platform_driver stpmic1_onkey_driver = {
> + .probe = stpmic1_onkey_probe,
> + .remove = stpmic1_onkey_remove,
> + .driver = {
> + .name = "stpmic1_onkey",
> + .of_match_table = of_match_ptr(of_stpmic1_onkey_match),
> + .pm = &stpmic1_onkey_pm,
> + },
> +};
> +module_platform_driver(stpmic1_onkey_driver);
> +
> +MODULE_DESCRIPTION("Onkey driver for STPMIC1");
> +MODULE_AUTHOR("Pascal Paillet <p.pail...@st.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
--
Dmitry
