Since the very beginning, unsigned int .irq member of struct
plat_serial8250_port introduced by commit eff443df679e ("OMAP1:
AMS_DELTA: add modem support") was statically initialized to a negative
value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta:
assign MODEM IRQ from GPIO descriptor") has introduced some new code
which checks for that member carrying a negative value which is
impossible.
Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check
and let the modem device be registered regardless of .irq value, and
the value handled by "serial8250" driver.
Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO
descriptor")
Reported-by: Dan Carpenter <dan.carpen...@oracle.com>
Signed-off-by: Janusz Krzysztofik <jmkrzy...@gmail.com>
---
arch/arm/mach-omap1/board-ams-delta.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c
b/arch/arm/mach-omap1/board-ams-delta.c
index af318d958fd2..3d191fd52910 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -773,7 +773,7 @@ static struct plat_serial8250_port ams_delta_modem_ports[]
= {
{
.membase = IOMEM(MODEM_VIRT),
.mapbase = MODEM_PHYS,
- .irq = -EINVAL, /* changed later */
+ .irq = IRQ_NOTCONNECTED, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
@@ -864,8 +864,7 @@ static int __init modem_nreset_init(void)
/*
- * This function expects MODEM IRQ number already assigned to the port
- * and fails if it's not.
+ * This function expects MODEM IRQ number already assigned to the port.
* The MODEM device requires its RESET# pin kept high during probe.
* That requirement can be fulfilled in several ways:
* - with a descriptor of already functional modem_nreset regulator
@@ -888,9 +887,6 @@ static int __init ams_delta_modem_init(void)
if (!machine_is_ams_delta())
return -ENODEV;
- if (ams_delta_modem_ports[0].irq < 0)
- return ams_delta_modem_ports[0].irq;
-
omap_cfg_reg(M14_1510_GPIO2);
/* Initialize the modem_nreset regulator consumer before use */
--
2.16.4
