Hello,
On Tue, Sep 11, 2018 at 02:55:49PM +0100, Lee Jones wrote:
> On Wed, 29 Aug 2018, Matti Vaittinen wrote:
>
> > Few regulators in BD71837 and BD71847 can output voltages from
> > different voltage ranges. Register interface is arranged so that
> > used range is selected by toggling bits which are not next to actual
> > voltage selection bits. Then the voltage inside selected range is
> > determined by voltage selection bits (as usual). Support BD71837
> > and BD71847 selectible range voltages using new pickable ranges
> > helpers.
>
> [...]
>
> > diff --git a/include/linux/mfd/rohm-bd718x7.h
> > b/include/linux/mfd/rohm-bd718x7.h
> > index d1730b97ba52..4cc617047d5f 100644
> > --- a/include/linux/mfd/rohm-bd718x7.h
> > +++ b/include/linux/mfd/rohm-bd718x7.h
> > @@ -7,13 +7,13 @@
> > #include <linux/regmap.h>
> >
> > enum {
> > - BD718XX_TYPE_BD71837,
> > + BD718XX_TYPE_BD71837 = 0,
> > BD718XX_TYPE_BD71847,
> > BD718XX_TYPE_AMNT // Keep this as last item
> > };
> >
> > enum {
> > - BD718XX_BUCK1 = 0,
> > + BD718XX_BUCK1 = 0,
> > BD718XX_BUCK2,
> > BD718XX_BUCK3,
> > BD718XX_BUCK4,
> > @@ -31,31 +31,27 @@ enum {
> > BD718XX_REGULATOR_MAX,
> > };
>
> Even though I don't care enough to NACK the patch, the above are
> unrelated changes and should normally be contained in a separate
> patch.
Thanks. But as I am going to modify the patch set anyways I can do this
change in first patch for the series. You're right that it is more
appropriate place for this change.
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <lee.jo...@linaro.org>
>
> --
> Lee Jones [李琼斯]
> Linaro Services Technical Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
