due to the size the files are posted at http://linux.lang.hm/linux
let me know what else I can send to help.
David Lang
On Mon, 25 Jun 2007, Randy Dunlap wrote:
Date: Mon, 25 Jun 2007 15:40:28 -0700
From: Randy Dunlap <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: Andrew Morton <[EMAIL PROTECTED]>, linux-kernel@vger.kernel.org,
[EMAIL PROTECTED]
Subject: Re: long-term regression
[EMAIL PROTECTED] wrote:
On Thu, 21 Jun 2007, Randy Dunlap wrote:
> Date: Thu, 21 Jun 2007 08:36:59 -0700
> From: Randy Dunlap <[EMAIL PROTECTED]>
> To: Andrew Morton <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED], linux-kernel@vger.kernel.org,
> [EMAIL PROTECTED]
> Subject: Re: long-term regression
>
> On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote:
>
> > > On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote:
> > > I haven't had time to bisect this, but I'm having a problem on a
> > > AMD64
> > > gentoo system where the printer doesn't work with recent kernels.
> > >
> > > 2.6.18-rc3 worked
> > > 2.6.21.1 doesn't
> > > 2.6.22-rc4 doesn't
> > >
> > > unfortunantly the system is gooted on 2.6.18 at the moment and I'm
> > > out of
> > > town so my ability to test is limited I can provide the 2.6.22-rc4
> > > (attached) and 2.6.18-rc3 configs.
> > >
> > > dmesg appears to show the port being detected, but writes to the
> > > port
> > > under newer kernels appear to complete, but no data gets to the
> > > printer.
> > >
> > > any suggestions other then doing the large bisect?
> >
> > That would be good, thanks. Please be sure to cc linux-usb-devel on
> > the results.
>
> OK, I'm curious about how someone deduced that this is a problem
> with a USB printer vs. parallel port printer since the config file has:
>
> CONFIG_PRINTER=y
> CONFIG_USB_PRINTER=y
>
> The kernel boot log should probably be posted also.
here is the dmesg from 2.6.22-rc4 and kern.log showing 2.6.22.-rc4 and
2.6.180rc3
the printer not working is the parallel port.
This email didn't show up on lkml or linux-usb-devel due to size limits (it
was 900+ KB).
David, please send your working 2.6.18 config file.
Can you post the kernel log files on the web somewhere?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
