On Mon, 25 Jun 2007 15:56:17 -0700 (PDT) [EMAIL PROTECTED] wrote: > due to the size the files are posted at http://linux.lang.hm/linux > > let me know what else I can send to help. > > David Lang
I suggest that you test 2.6.22-rcN using one or both of these boot options: noisapnp pnpacpi=off Somewhere between 2.6.18 and 2.6.22-development, the ACPI config symbol also starting enabling (selecting) PNP. That's one of many differences.... I would also disable CONFIG_USB_USS720, at least for testing. > On Mon, 25 Jun 2007, Randy Dunlap wrote: > > > Date: Mon, 25 Jun 2007 15:40:28 -0700 > > From: Randy Dunlap <[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > > Cc: Andrew Morton <[EMAIL PROTECTED]>, linux-kernel@vger.kernel.org, > > [EMAIL PROTECTED] > > Subject: Re: long-term regression > > > > [EMAIL PROTECTED] wrote: > >> On Thu, 21 Jun 2007, Randy Dunlap wrote: > >> > >> > Date: Thu, 21 Jun 2007 08:36:59 -0700 > >> > From: Randy Dunlap <[EMAIL PROTECTED]> > >> > To: Andrew Morton <[EMAIL PROTECTED]> > >> > Cc: [EMAIL PROTECTED], linux-kernel@vger.kernel.org, > >> > [EMAIL PROTECTED] > >> > Subject: Re: long-term regression > >> > > >> > On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote: > >> > > >> > > > On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote: > >> > > > I haven't had time to bisect this, but I'm having a problem on a > >> > > > AMD64 > >> > > > gentoo system where the printer doesn't work with recent kernels. > >> > > > > >> > > > 2.6.18-rc3 worked > >> > > > 2.6.21.1 doesn't > >> > > > 2.6.22-rc4 doesn't > >> > > > > >> > > > unfortunantly the system is gooted on 2.6.18 at the moment and I'm > >> > > > out of > >> > > > town so my ability to test is limited I can provide the 2.6.22-rc4 > >> > > > (attached) and 2.6.18-rc3 configs. > >> > > > > >> > > > dmesg appears to show the port being detected, but writes to the > >> > > > port > >> > > > under newer kernels appear to complete, but no data gets to the > >> > > > printer. > >> > > > > >> > > > any suggestions other then doing the large bisect? > >> > > > >> > > That would be good, thanks. Please be sure to cc linux-usb-devel on > >> > > the results. > >> > > >> > OK, I'm curious about how someone deduced that this is a problem > >> > with a USB printer vs. parallel port printer since the config file has: > >> > > >> > CONFIG_PRINTER=y > >> > CONFIG_USB_PRINTER=y > >> > > >> > The kernel boot log should probably be posted also. > >> > >> here is the dmesg from 2.6.22-rc4 and kern.log showing 2.6.22.-rc4 and > >> 2.6.180rc3 > >> > >> the printer not working is the parallel port. > > > > This email didn't show up on lkml or linux-usb-devel due to size limits (it > > was 900+ KB). > > > > David, please send your working 2.6.18 config file. > > > > Can you post the kernel log files on the web somewhere? --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
