On Fri, Jul 27, 2018 at 01:17:57PM +0100, Srinivas Kandagatla wrote:
> This patch adds bindings for wcd9335 audio codec which can support both
> SLIMbus
> and I2S/I2C interface.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
> ---
> .../devicetree/bindings/sound/qcom,wcd9335.txt | 123
> +++++++++++++++++++++
> 1 file changed, 123 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
> b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
> new file mode 100644
> index 000000000000..1d8d49e30af7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
> @@ -0,0 +1,123 @@
> +QCOM WCD9335 Codec
> +
> +Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
> +Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
> +the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
> +Soundwire controller, interrupt mux. It supports both I2S/I2C and
> +SLIMbus audio interfaces.
> +
> +Required properties with SLIMbus Interface:
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: For SLIMbus interface it should be "slimMID,PID",
> + textual representation of Manufacturer ID, Product Code,
> + shall be in lower case hexadecimal with leading zeroes
> + suppressed. Refer to slimbus/bus.txt for details.
> + Should be:
> + "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
> +
> +- reg
> + Usage: required
> + Value type: <u32 u32>
> + Definition: Should be ('Device index', 'Instance ID')
> +
> +- interrupts
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Interrupts via WCD INTR1 and INTR2 pins
> +
> +- interrupt-names:
> + Usage: required
> + Value type: <String array>
> + Definition: Interrupt names of WCD INTR1 and INTR2
> + Should be: "intr1", "intr2"
> +
> +- reset-gpio:
reset-gpios
> + Usage: required
> + Value type: <String Array>
> + Definition: Reset gpio line
> +
> +- qcom,ifd:
> + Usage: required
> + Value type: <phandle>
> + Definition: SLIM interface device
Wouldn't this be the parent?
> +
> +- clocks:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: See clock-bindings.txt section "consumers". List of
> + three clock specifiers for mclk, mclk2 and slimbus clock.
> +
> +- clock-names:
> + Usage: required
> + Value type: <string>
> + Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
> +
> +- vdd-buck-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the 1.8V buck supply
> +
> +- vdd-buck-sido-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the 1.8V SIDO buck supply
> +
> +- vdd-rx-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the 1.8V rx supply
> +
> +- vdd-tx-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the 1.8V tx supply
> +
> +- vdd-vbat-supply:
> + Usage: Optional
> + Value type: <phandle>
> + Definition: Should contain a reference to the vbat supply
> +
> +- vdd-micbias-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the micbias supply
> +
> +- vdd-io-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: Should contain a reference to the 1.8V io supply
> +
> +- interrupt-controller:
> + Usage: required
> + Definition: Indicating that this is a interrupt controller
> +
> +- #interrupt-cells:
> + Usage: required
> + Value type: <int>
> + Definition: should be 1
> +
> +#sound-dai-cells
> + Usage: required
> + Value type: <u32>
> + Definition: Must be 1
> +
> +codec@1{
audio-codec@1
> + compatible = "slim217,1a0";
> + reg = <1 0>;
> + interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "intr2"
> + reset-gpio = <&msmgpio 64 0>;
> + qcom,ifd = <&wc9335_ifd>;
> + clock-names = "mclk", "native";
> + clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
> + <&rpmcc RPM_SMD_BB_CLK1>;
> + vdd-buck-supply = <&pm8994_s4>;
> + vdd-rx-supply = <&pm8994_s4>;
> + vdd-buck-sido-supply = <&pm8994_s4>;
> + vdd-tx-supply = <&pm8994_s4>;
> + vdd-io-supply = <&pm8994_s4>;
> + #sound-dai-cells = <1>;
> +}
> --
> 2.16.2
>
